Photo 1 of 2Tram Crossing Warning Preformed Thermoplastic Road Marking
£278.93incl. VAT
Need help choosing the right product?Our UK team answers Mon–Fri 08:30–17:00
Specification for the selected option
Symbol Size: 1200x1200mm
| Certifications | |
|---|---|
| Conforms | BS EN 1871 |
| Material | |
| Type | Thermoplastic |
| Colour | Red, white & black |
| Dimensions | |
| Width | 1200mm |
| Length | 1200mm |
| Specifications | |
| Application | If using glass bead, 250g of glass bead per square metre |
Secure checkout
Preformed thermoplastic road marking for warning drivers of upcoming tramway crossings and junctions.
This durable surface marking alerts approaching traffic to road sections shared with trams and light rail. Elongated to remain clearly legible to motorists travelling at speed, it fuses directly to the road substrate using a standard gas burner to provide a neat, long-lasting warning alongside roadside signage.
Key Features
- Straightforward application using a standard gas burner with no specialist tools required
- Pre-cut elongated symbol designed for clear visual proportion when approached at driving speed
- Factory-embedded glass beads provide an instant non-slip surface
- Minimal preparation needed for clean, sound bituminous surfaces
- Additional glass beads can be fused into the molten material for enhanced skid resistance
- Conforms fully to BS EN 1871
Specifications
- Material: Preformed thermoplastic
- Compliance: BS EN 1871
- Surface application temperature: 5°C to 40°C
- Primer requirement: 200ml/m² to 400ml/m² on concrete or aged asphalt/tarmac depending on substrate porosity
- Available dimensions: 1200 x 1200mm, 2500 x 1200mm, 3030 x 1200mm, 4040 x 1600mm, 4300 x 1500mm, 5050 x 2000mm, 7070 x 2000mm
Installation Guidelines
- Ensure the road surface is clean, dry, and free of dirt, loose stones, grease, and road salt before application.
- Apply primer to aged tarmac, asphalt, and concrete surfaces before positioning the marking.
- Position the marking bead-side up and apply uniform heat with a gas burner until completely bonded to the surface.
- Application onto block paving is not recommended, as moisture and block movement cause cracking and premature failure.
- Can be overlaid directly onto worn-down thermoplastic; thick markings or thermoset coatings must be removed by grinding, scabbling, hydro-blasting, or thermal lance.
Applications
- Urban tramway crossings
- Road junctions intersecting with light rail routes
- Public transport corridors and shared carriageways
- City centre traffic management schemes
More road & floor markings for the job
Shop all road & floor markings ›
Conformable Anti-Slip Tape with Aluminium Backing - Multiple Widths and Colours3 colours · 4 widths
From£71.98incl. VAT
Pedestrians In Road Thermoplastic Road Marking Symbol - Multiple Sizes7 symbol sizes
From£278.93incl. VAT
Quote for this product
This product is added to your request automatically. Add quantities and anything else you need for the same site.
Selected: 1200x1200mm
1200x1200mm



