Photo 1 of 12Thermoplastic Road Line Marking Tape Pre-Beaded RAL 1003 Yellow - Multiple Widths
£4.22incl. VAT
Colour: Yellow (RAL 1003)
Need help choosing the right product?Our UK team answers Mon–Fri 08:30–17:00
Specification for the selected option
Colour: Yellow (RAL 1003) · Width: 50mm · Length: 1m
| Certifications | |
|---|---|
| Conforms | BS EN 1871 |
| Material | |
| Type | Thermoplastic Marker |
| Colour | Signal Yellow RAL 1003 |
| Dimensions | |
| Width | 50mm |
| Length | 1000mm |
| Specifications | |
| Application | If using glass bead, 250g of glass bead per square metre |
Secure checkout
Durable pre-beaded thermoplastic road marking tape for high-visibility, permanent surface delineation.
Designed for rapid torch-on application directly to tarmac and asphalt surfaces, this thermoplastic tape provides an immediate, hard-wearing finish on roads, car parks, footpaths, cycle tracks, and sports grounds. Supplied in 5-metre rolls across multiple widths, it features integrated glass beads for retroreflectivity alongside anti-slip properties.
Key Features
- Factory pre-beaded with reflective beads and anti-slip coating for enhanced visibility and grip
- Simple torch-on installation using standard gas burner equipment
- Rapid curing allows surfaces to reopen to traffic almost immediately after cooling
- Conforms to BS EN 1871 standards for road marking materials
- Suitable for direct application to asphalt and bituminous tarmac
- Can be cut to size to accommodate standard TSRGD road marking diagram configurations
Specifications
- Material: Preformed thermoplastic
- Colour: Yellow (RAL 1003)
- Roll Length: 5m
- Available Widths: 50mm, 75mm, 100mm, 150mm, 200mm
- Surface Finish: Pre-beaded retroreflective
- Compliance: BS EN 1871
Width Selection & Applications
- 50mm width: Dashed parking demarcation, edging, and hatched areas
- 100mm width: Standard car park bay lines and lane separation
- 150mm width: Dedicated cycle lanes and heavy vehicle parking areas
- 200mm width: Junction give-way priority lines and loading bay perimeters
- General marking on footpaths, playgrounds, and hard sports surfaces
Installation & Surface Preparation
- Ensure the substrate is thoroughly dry, clean, and free of dust and debris before laying
- Applies directly to sound asphalt and tarmac without additional primers
- A compatible surface primer must be applied to concrete, block paving, or aged, aggregate-exposed tarmac older than six months
- Do not apply over paint; existing painted lines must be scraped or abraded away first
- Can be applied over worn, heavily trafficked existing thermoplastic markings
- In cold weather, gently warm the roll prior to unrolling to avoid material snapping
- Position in place and melt thoroughly with a propane gas torch until fused to the ground
More road & floor markings for the job
Shop all road & floor markings ›
Conformable Anti-Slip Tape with Aluminium Backing - Multiple Widths and Colours3 colours · 4 widths
From£71.98incl. VAT
Pedestrians In Road Thermoplastic Road Marking Symbol - Multiple Sizes7 symbol sizes
From£278.93incl. VAT
Quote for this product
This product is added to your request automatically. Add quantities and anything else you need for the same site.
Selected: Yellow (RAL 1003) / 50mm / 1m
Yellow (RAL 1003) / 50mm / 1m



