Photo 1 of 2Steep Descent Thermoplastic Road Warning Marking - Multiple Sizes
£278.93incl. VAT
Need help choosing the right product?Our UK team answers Mon–Fri 08:30–17:00
Specification for the selected option
Symbol Size: 1200x1200mm
| Certifications | |
|---|---|
| Conforms | BS EN 1871 |
| Material | |
| Type | Thermoplastic |
| Colour | Red, white & black |
| Dimensions | |
| Width | 1200mm |
| Length | 1200mm |
| Specifications | |
| Application | If using glass bead, 250g of glass bead per square metre |
Secure checkout
Preformed thermoplastic road marking for steep downhill hazard warning.
This preformed road marking delivers a clear visual alert to approaching drivers on routes featuring sharp downward gradients where reducing speed or selecting a low gear is advised. Designed with deliberate elongation to ensure correct visual proportions at speed, it provides an immediate, durable warning on highways and private roadways.
Key Features
- BS EN 1871 compliant for highway and private road use
- Factory-embedded glass beads provide built-in non-slip skid resistance
- Pre-cut symbol ensures consistent sizing and a professional finish
- Elongated dimensions engineered for optimal perspective and legibility when approached at driving speeds
- Straightforward application using a gas torch without specialist mixing equipment
- Additional glass beads can be post-sprinkled onto the molten surface for enhanced grip
Specifications
- Material: Preformed thermoplastic
- Standard: BS EN 1871
- Required surface temperature: 5°C to 40°C
- Primer application rate: 200ml/m² to 400ml/m² (on porous or aged substrates)
- Symbol sizes: 1200 x 1200mm, 2500 x 1200mm, 3030 x 1200mm, 4040 x 1600mm, 4300 x 1500mm, 5050 x 2000mm, 7070 x 2000mm
Installation Guidelines
- Substrates must be thoroughly cleaned of all loose dust, stones, oil, grease, and road salts before laying
- Substrate temperature must be between 5°C and 40°C during installation
- Application on concrete, worn asphalt, or aged tarmac requires primer applied at 200ml/m² to 400ml/m²
- Position the marking bead-side up on the prepared surface and heat evenly with a gas burner until completely melted
- Installation on block paving is not recommended, as joint moisture and independent block movement cause premature cracking and failure
Applications
- Rural and urban roads featuring steep downward descents
- Approaches where heavy goods vehicles or motorists require low gear warnings
- Local road safety schemes used in conjunction with post-mounted warning signs
- Private estates, industrial facilities, and car parks with severe gradient changes
More road & floor markings for the job
Shop all road & floor markings ›
Conformable Anti-Slip Tape with Aluminium Backing - Multiple Widths and Colours3 colours · 4 widths
From£71.98incl. VAT
Pedestrians In Road Thermoplastic Road Marking Symbol - Multiple Sizes7 symbol sizes
From£278.93incl. VAT
Quote for this product
This product is added to your request automatically. Add quantities and anything else you need for the same site.
Selected: 1200x1200mm
1200x1200mm



