Photo 1 of 2Slippery Surface Road Safety Thermoplastic Marking - Multiple Sizes
£278.93incl. VAT
Need help choosing the right product?Our UK team answers Mon–Fri 08:30–17:00
Specification for the selected option
Symbol Size: 1200x1200mm
| Certifications | |
|---|---|
| Conforms | BS EN 1871 |
| Material | |
| Type | Thermoplastic |
| Colour | Red, white & black |
| Dimensions | |
| Width | 1200mm |
| Length | 1200mm |
| Specifications | |
| Application | If using glass bead, 250g of glass bead per square metre |
Secure checkout
Durable preformed thermoplastic marking for slippery road warnings.
This pre-cut road safety marking provides a clear visual alert where surfaces become hazardous due to water, mud, ice, or sea spray. Available in elongated formats to counter visual foreshortening at driving speeds, it warns approaching motorists to reduce speed ahead of hazardous stretches.
Key Features
- Pre-cut design ensures a clean, professional finish without complex setup
- Factory-embedded glass beads provide immediate slip resistance
- Straightforward torch-on application with a standard gas burner
- Fully conforms to BS EN 1871 standards
- Elongated symbol proportions ensure clear visibility at approach speeds
- Quick to apply with minimal surface preparation required
Specifications
- Material: Preformed thermoplastic
- Standard: BS EN 1871
- Surface finish: Non-slip with embedded glass beads
- Substrate application temperature: 5°C to 40°C
- Primer application rate: 200ml/m² to 400ml/m² on concrete or aged asphalt
- Available sizes: 1200 x 1200mm, 2500 x 1200mm, 3030 x 1200mm, 4040 x 1600mm, 4300 x 1500mm, 5050 x 2000mm, 7070 x 2000mm
Installation & Surface Preparation
- Thoroughly clean the surface to remove all loose debris, oil, grease, and salt before application.
- Apply primer to concrete, aged tarmac, or worn asphalt surfaces prior to laying the marking.
- Position the symbol bead-side up and heat evenly with a gas burner until completely melted onto the substrate.
- Extra glass beads can be scattered over the hot surface and fused with heat if enhanced friction is required.
- Not recommended for installation on block paving due to joint moisture and individual block movement causing cracking.
Applications
- Coastal roads subject to sea spray and ice
- Rural routes prone to agricultural mud and standing water
- Approaches to bridges, sharp bends, and shaded carriageways
- Car parks, transport depots, and industrial access roads
More road & floor markings for the job
Shop all road & floor markings ›
Conformable Anti-Slip Tape with Aluminium Backing - Multiple Widths and Colours3 colours · 4 widths
From£71.98incl. VAT
Pedestrians In Road Thermoplastic Road Marking Symbol - Multiple Sizes7 symbol sizes
From£278.93incl. VAT
Quote for this product
This product is added to your request automatically. Add quantities and anything else you need for the same site.
Selected: 1200x1200mm
1200x1200mm



