Photo 1 of 4Self-Righting Flexible Traffic Bollard with NAL Socket - Black or White
Specification for the selected option
Post Colour: Black · Bollard Symbols: Keep Left (D610) · Bollard Back: No Sticker
| Certifications | |
|---|---|
| Conforms | BS 8442:2015, BS EN 12767:2007 100kph NE4 compliant |
| Material | |
| Colour | Black or white body with yellow reflectors |
| Dimensions | |
| Depth | 90mm |
| Width | 340mm |
| Height Total | 1125mm |
| Height Above Ground | 975mm |
| Weight | 4.70kg |
| Features | |
| Fixing Method | Cast In |
Flexible self-righting traffic bollard engineered for durable road safety management.
This self-righting bollard incorporates an integral spigot compatible with standard NAL retention sockets, enabling rapid fitting and straightforward replacement following vehicular impacts. The post body bends on impact and returns to an upright position. Within the ground socket, the post is locked via a side compartment secured with a protective plate and security Allen screw. Fitted with high-visibility R3B retroreflective sheeting, each unit is manufactured to BS 8442 standards and supported by a 6-year delamination warranty.
Key Features
- Flexible, self-righting body design absorbs vehicle impacts and rebounds upright
- Spigot base compatible with NAL retention sockets for quick insertion and removal
- Side socket locking chamber secured by a plate and security Allen screw
- High-visibility R3B grade retroreflective sign face
- 6-year delamination warranty on reflective sheeting
- Available in single-aspect or dual-aspect configurations
- Supplied with a plain non-reflective rear as standard, with yellow reflective backing or secondary sign face options
- 100% recyclable body construction
Specifications
- Standard compliance: BS 8442
- Reflectivity grade: R3B
- Post colours: Black or White
- Fixing type: Spigot base for NAL retention socket
- Sign face options: Keep Left (D610), Keep Right (D610), Pass Either Side (D611), No Entry (D616), Go Left (D606), Go Right (D606), Turn Left (D609), Turn Right (D609), Cycle Lane (D955), or Plain Face
- Delamination warranty: 6 years
- Material recyclability: 100%
Installation Guidelines
- Excavate a pit measuring 450mm square and 50mm deeper than the overall socket depth
- Backfill the bottom 50mm with pea gravel or shingle to allow adequate drainage
- Place the retention socket flush with finished ground level and insert the levelling pole, securing it via the side hatch
- Surround the socket with ST4 or C20 minimum strength concrete, leaving 50mm to 80mm clearance for top surfacing
- Check vertical alignment with a spirit level before the concrete cures
- Remove the levelling pole once set and reinstate the surface flush to ground level
Applications
- Urban highways and traffic islands
- Traffic calming schemes and pedestrian refuges
- Cycle lane segregation
- Car park delineation and entry lanes
- Permanent or temporary traffic management installations
More barriers & bollards for the job
Shop all barriers & bollards ›Quote for this product
This product is added to your request automatically. Add quantities and anything else you need for the same site.
Selected: Black / Keep Left (D610) / No Sticker


