Photo 1 of 5Red 100mm Pre-Cut Thermoplastic Alphabet Road Surface Marking
Specification for the selected option
Character Height + Colour + Character: 100mm - Red - A
This option (100mm - Red - A) weighs 30g.
| Weight | 30g |
|---|
Durable pre-cut red thermoplastic alphabet letter markings for road, car park, and facility surfaces.
Designed for rapid torch-on installation, these preformed thermoplastic letters deliver clean, permanent identification across parking areas, access lanes, and roadways. Each marking is factory pre-beaded with glass beads to provide immediate retroreflectivity and skid resistance for vehicular and pedestrian traffic. Applied using a standard gas heat torch without specialist equipment, the material sets rapidly and can be reopened to traffic within minutes of application.
Key Features
- Pre-cut letter profiles provide consistent, sharp edges without stencils
- Conforms to BS EN 1871 specifications for road marking materials
- Pre-beaded surface provides immediate night-time retroreflectivity and slip resistance
- Quick application using a standard gas heat torch
- Rapid curing allows surfaces to be trafficked within minutes
- Hard-wearing thermoplastic resists heavy vehicle traffic, weathering, and road salts
- Compatible with additional surface glass beads to further increase traction
Specifications
- Character height: 100mm (sizes available from 100mm to 1000mm)
- Colour: Red
- Material: Preformed retroreflective thermoplastic
- Compliance: BS EN 1871
- Application surface temperature: 5°C to 40°C
- Primer requirement: 200ml/m² to 400ml/m² on concrete, worn asphalt, or aged tarmac
Installation Notes
- Ensure the application surface is dry and free from oil, grease, salts, and loose debris
- Substrates such as concrete, block paving, or aged asphalt require a suitable fast-drying primer
- Position characters accurately before heating evenly with a gas burner until melted to the substrate
- Installation on block paving is not recommended or guaranteed due to block movement and moisture in sand joints
Applications
- Car park bay allocation and directional lettering
- Logistics yards, loading bays, and industrial facilities
- Highway and private road surface identification
- Pedestrian walkways, school grounds, and cycle paths
More road & floor markings for the job
Shop all road & floor markings ›Quote for this product
This product is added to your request automatically. Add quantities and anything else you need for the same site.
Selected: 100mm / Red / A


