Photo 1 of 4PVC Solvent Weld Cement for Pipework - 125ml or 250ml
£21.38incl. VAT
Need help choosing the right product?Our UK team answers Mon–Fri 08:30–17:00
Specification for the selected option
Size: 125ml
This option (125ml) weighs 5kg.
| Weight | 5kg |
|---|
Secure checkout
High-strength PVC solvent weld cement for secure pipe bonding.
This PVC cement is formulated for joining plastic pipework in waste, sewerage, rainwater, and potable water systems. It softens and fuses PVC surfaces together to produce a permanent, watertight, gap-filling seal. Suitable for internal and external installations, it comes in 125ml or 250ml tins.
Key Features
- Quick-drying formula drying in around 30 minutes, fully curing within 2 hours depending on temperature
- Fills minor gaps between surfaces for a completely sealed joint
- Waterproof bond engineered specifically for water-carrying pipe networks
- WRAS approved (Water Regulations Advisory Scheme) for safe use on potable drinking water pipework
- Suitable for indoor and outdoor drainage, downpipe, and plumbing assemblies
- Supplied in convenient 125ml and 250ml tin sizes
Specifications
- Product type: Solvent weld adhesive cement
- Material compatibility: Polyvinyl chloride (PVC) pipe and fittings
- Container capacities: 125ml, 250ml
- Approval: WRAS approved
- Initial drying time: Approximately 30 minutes
- Full cure time: Up to 2 hours
- Application environment: Indoor and outdoor use
Applications
- Potable water supply pipelines
- Domestic and commercial waste pipework
- Rainwater downpipes and drainage channel systems
- Sewerage pipe connections
- General PVC plumbing repairs and fabrication
Installation and Safety Guidance
- Ensure pipe ends are cut squarely, deburred, chamfered, and free of dirt before assembly.
- Dry fit components first to confirm proper engagement with the fitting hub.
- Clean bonding surfaces thoroughly and apply a suitable primer to the pipe exterior and hub interior.
- Apply a generous, even layer of cement to both mating surfaces.
- Push the pipe firmly into the socket, turning circular pipework a quarter turn, and hold in place for roughly 30 seconds to prevent push-out.
- Wipe away any excess cement immediately after jointing.
- Work in well-ventilated areas and wear appropriate PPE, including protective gloves, eye protection, and respiratory protective equipment fitted with an A2P3 filter to protect against solvent vapour.
More drainage channels & gratings for the job
Shop all drainage channels & gratings ›
Recessed Galvanised Manhole Cover with Infill Grid - 100mm Depth8 clear opening sizes
From£373.70incl. VAT
GrassTop Manhole Cover with Polypropylene Frame - 600x450mm - Black2 clear opening sizes
From£264.26incl. VAT
Triple Seal Aluminium Inspection Cover with 41mm Recessed Tray12 clear opening sizes
From£312.60incl. VAT
Grass-Top Manhole Cover with Galvanised Tray - 650 x 500mm
£389.23incl. VAT
Quote for this product
This product is added to your request automatically. Add quantities and anything else you need for the same site.
Selected: 125ml
125ml



