Photo 1 of 2Preformed Thermoplastic Road Marking with Exclamation Symbol - Multiple Sizes
Specification for the selected option
Symbol Size: 1200x1200mm
| Certifications | |
|---|---|
| Conforms | BS EN 1871 |
| Material | |
| Type | Thermoplastic |
| Colour | Red, white & black |
| Dimensions | |
| Width | 1200mm |
| Length | 1200mm |
| Specifications | |
| Application | If using glass bead, 250g of glass bead per square metre |
High-visibility preformed thermoplastic road marking for hazard awareness and driver warning.
This preformed thermoplastic road marking features an exclamation symbol enclosed within a warning triangle. It is designed for road locations where hazards cannot be portrayed with standard symbolic pictograms, such as sudden hidden dips on A and B roads that risk suspension bottoming out or loss of vehicle control. The marking is intentionally elongated across larger sizes to counteract visual distortion, allowing approaching motorists travelling at speed to read and interpret the warning accurately. It can also be paired with post-mounted warning signs to reinforce hazard awareness.
Key Features
- Straightforward application using a standard gas heat gun
- Factory pre-cut design ensures a uniform, neat, and professional finish
- Fast installation with minimal surface preparation
- Can be treated with surface glass beads melted in place for non-slip vehicular and pedestrian traction
- Elongated dimensions counter perspective foreshortening at driving speeds
- Conforms to BS EN 1871 standard
Specifications
- Material: Preformed thermoplastic
- Symbol: Warning triangle with exclamation mark
- Available Dimensions: 1200mm x 1200mm, 2500mm x 1200mm, 3030mm x 1200mm, 4040mm x 1600mm, 4300mm x 1500mm, 5050mm x 2000mm, and 7070mm x 2000mm
- Required Surface Temperature: 5°C to 40°C
- Primer Coverage Rate: 200ml/m² to 400ml/m² (depending on porosity)
- Standard: BS EN 1871
Installation & Substrate Notes
- Clean the surface thoroughly of all loose debris, oil, grease, and road salts before positioning.
- Primer is required on concrete, aged tarmac, or worn asphalt at a coverage rate between 200ml/m² and 400ml/m².
- Application on block paving is not recommended as substrate movement and trapped joint moisture can cause the marking to crack.
- Existing markings can be removed via high-pressure water blasting, sandblasting, scabbler, or hot compressed air lance; heavily worn, thin markings can be overlaid directly.
Applications
- Highlighting hidden dips and sudden changes in road topography
- Marking undefined or non-standard road hazards on A and B roads
- Reinforcing roadside warning signage
- Enhancing driver awareness on high-speed approaches
More road & floor markings for the job
Shop all road & floor markings ›Quote for this product
This product is added to your request automatically. Add quantities and anything else you need for the same site.
Selected: 1200x1200mm


