Photo 1 of 2Preformed Thermoplastic Left Turn Ahead Arrow Road Marking - 750mm
£186.19incl. VAT
Need help choosing the right product?Our UK team answers Mon–Fri 08:30–17:00
Specification for the selected option
Symbol Size: 750mm
| Certifications | |
|---|---|
| Conforms | BS EN 1871 |
| Material | |
| Type | Thermoplastic |
| Colour | Blue/White |
| Dimensions | |
| Diameter | 750mm |
| Specifications | |
| Application | If using glass bead, 250g of glass bead per square metre |
Secure checkout
Durable preformed thermoplastic left turn ahead arrow for clear, professional road direction marking.
This preformed thermoplastic arrow marking provides high-visibility directional instruction, guiding drivers safely through car parks, one-way systems, and intersections where single carriageways meet dual carriageways. Pre-cut for uniform line definition, it is applied directly to the road using a standard gas torch to create a resilient, permanent traffic management solution.
Key Features
- Fully conforms to BS EN 1871 specifications for road marking materials
- Factory-embedded glass beads deliver immediate slip and skid resistance
- Fast torch-on application with no specialist machinery required
- Pre-formed shape delivers a clean, consistent appearance
- Distorted elongation ratios maintain sharp visual legibility for approaching motorists
- Option to add extra surface glass beads during heating for enhanced friction
Specifications
- Material: Preformed thermoplastic
- Design: Left turn ahead arrow (non-reversible)
- Size: 750mm x 750mm (also available in 1200mm x 1200mm, 2500mm x 1500mm, and 4300mm x 1500mm)
- Standard: BS EN 1871
- Operating Surface Temperature: 5°C to 40°C
- Primer Coverage Rate: 200ml/m² to 400ml/m² (on porous or aged substrates)
Applications
- Car parks and commercial vehicle yards
- One-way road configurations
- Junctions, intersections, and carriageway transitions
- Private access roads and logistics facilities
Installation & Surface Preparation
- Clear the substrate thoroughly of all dirt, dust, oil, grease, and salt before application.
- A fast-drying primer is required when applying to concrete, worn asphalt, aged tarmac, or paving blocks.
- Position the marking bead-side up on the prepped road surface and melt uniformly using a gas burner.
- Application to block paving is subject to a shorter lifespan due to individual block movement and sand-joint moisture.
More road & floor markings for the job
Shop all road & floor markings ›
Conformable Anti-Slip Tape with Aluminium Backing - Multiple Widths and Colours3 colours · 4 widths
From£71.98incl. VAT
Pedestrians In Road Thermoplastic Road Marking Symbol - Multiple Sizes7 symbol sizes
From£278.93incl. VAT
Quote for this product
This product is added to your request automatically. Add quantities and anything else you need for the same site.
Selected: 750mm
750mm



