Photo 1 of 11Permeable Paving Grid System with Concrete Inserts - Multiple Colours
Specification for the selected option
Frame Colour: Black · Insert Colour: Anthracite Concrete
| Material | |
|---|---|
| Type | Recycled Polyethylene | Concrete |
| Dimensions | |
| Coverage Per Pallet | 57.33m² |
| Depth | 50mm |
| Width | 330mm |
| Length | 330mm |
| Wall Thickness | 18mm |
Durable permeable paving grid system for sustainable surfaces.
This interlocking ground reinforcement system uses robust concrete inserts within recycled cellular frames to create hard-wearing, load-bearing surfaces. The twin-wall profile features an integrated 18mm drainage void that stops silt and debris from clogging water channels, allowing rainwater to drain naturally into the ground below to help satisfy legal drainage regulations. Straightforward to lay without mortars, adhesives, or wet trades, it provides the appearance of conventional paving slabs at a fraction of the handling weight.
Key Features
- Permanently permeable construction with an 18mm drainage void to prevent standing water and surface run-off
- Exceptional load capacity of up to 800 tonnes/sqm with a 10-tonne point pressure resistance once filled
- Manufactured from 100% recycled polyethylene
- Highly resistant to petrol, vehicle fluids, acids, alkalis, and alcohols
- Simple interlocking jigsaw connection system requires no specialist tools or fixings
- Dry installation method eliminates the need for mortar or bonding agents
- Available in pre-locked sheets of 12 frames for rapid coverage on prepared ground
- Compatible with standard 50mm profile ground reinforcement grids
Specifications
- Frame depth: 50mm
- Frame material: 100% recycled polyethylene
- Frame colour options: Black, Terracotta
- Insert colour options: Anthracite Concrete, Grey Concrete, Red Concrete, White Concrete
- Insert capacity: 4 concrete blocks per frame
- Single insert weight: 2.12kg
- Total filled frame weight: Approximately 9.55kg
- Load rating: 800 tonnes/sqm
- Pressure resistance: 10 tonnes
- Drainage void gap: 18mm
Installation Notes
- Lay on a suitably prepared and levelled aggregate sub-base.
- Install a permeable geotextile fleece membrane beneath the units to prevent weeds and grass penetrating the cells while preserving water drainage.
- Interlock the frames across the area before dropping the concrete blocks directly into the cell voids.
Applications
- Driveways and residential parking
- Commercial car parks and overflow bays
- Public walkways, pathways, and patios
- Disabled access ramps and level routes
- Courtyards and utility service zones
- Event spaces and helipads
More paving grids for the job
Shop all paving grids ›Quote for this product
This product is added to your request automatically. Add quantities and anything else you need for the same site.
Selected: Black / Anthracite Concrete


