Photo 1 of 6MMA High-Friction Surface Repair Kit with Aggregate - 2m² Coverage
£363.43incl. VAT
Need help choosing the right product?Our UK team answers Mon–Fri 08:30–17:00
Specification for the selected option
Colour: Buff
| Certifications | |
|---|---|
| Conforms | HAPAS / BBA Approved |
| Material | |
| Type | MMA anti-skid repair, bauxite OR granite aggregate |
| Colour | Buff |
| Dimensions | |
| Coverage | 2sqm per tub |
| Weight | 25kg |
| Specifications | |
| Shelf Life | 12 Month Whilst Sealed |
Secure checkout
High-friction repair kit for restoring skid resistance on critical surfaces.
This cold-applied MMA repair kit provides a fast, reliable solution for patching or installing skid-resistant surfacing on roadways, walkways, and steps. Engineered to improve braking distances and pedestrian traction, it uses a non-toxic resin binder system and hard-wearing mineral aggregate to reinstate high-friction areas following utility excavations or surface wear.
Key Features
- BBA and HAPAS approved formulation
- Cold-applied system requiring no specialist hot-works equipment
- Non-toxic resin binder formulation
- Rapid curing time of approximately one hour depending on ambient temperature
- Supplied with all required tools and aggregate for immediate use
- Available in multiple surface colour finishes
What's Included
- 6kg MMA resin binding agent
- 14kg bauxite or granite aggregate
- Catalyst powder
- Notched resin spreader
- Stirring stick
- Protective gloves
Specifications
- Coverage: 2m² per pack
- Resin Binder: 6kg MMA liquid
- Aggregate: 14kg bauxite or granite
- Cure Time: Approximately 60 minutes (temperature dependent)
- Approvals: BBA, HAPAS
- Colour Options: Buff, Dark Grey, Green, Red
Applications
- Reinstating road surfaces following utility trench excavations
- High-risk highway locations including junction approaches and sharp bends
- Pedestrian crossing approaches and refuge islands
- Bus stops, dedicated bus lanes, and cycleways
- External steps, footbridges, ramps, and walkways
- Car park entrances, exits, and speed ramp approaches
Installation Guidelines
- Ensure the substrate is completely clean, sound, and dry (a gas torch may be used to thoroughly dry damp surfaces).
- Unpack all items and thoroughly mix the catalyst powder into the MMA resin binder using the supplied stirring stick.
- Pour and spread the mixed resin evenly over the designated 2m² area using the supplied spreader.
- Broadcast the aggregate evenly across the wet resin bed until fully covered.
- Allow the surface to cure for roughly 60 minutes, then sweep away any loose, unbonded aggregate before reopening the area to traffic.
More road repair materials for the job
Shop all road repair materials ›Quote for this product
This product is added to your request automatically. Add quantities and anything else you need for the same site.
Selected: Buff
Buff



