Photo 1 of 5Metallic Pedestrian Crossing Road Studs - Aluminium or Stainless Steel
£11.98incl. VAT
Need help choosing the right product?Our UK team answers Mon–Fri 08:30–17:00
Specification for the selected option
Metallic Stud Type: Aluminium Alloy Plain Top
| Material | |
|---|---|
| Type | Aluminium |
| Colour | Silver Natural Exposed Stainless Or Alloy Finish |
| Dimensions | |
| Width | 99mm |
| Length | 99mm |
| Depth | 30mm |
| Weight | 0.2kg |
| Specifications | |
| Application | Primarily Pedestrian Crossings |
Secure checkout
Durable metallic pedestrian crossing road studs for enhanced visibility and tactile demarcation.
These non-reflective metallic road studs are designed to delineate pedestrian crossing points on public carriageways, providing clear visual marking and physical tactile feedback. Formed from a single solid piece with an integrated anchor shank to prevent twisting or loosening, they fully comply with BS 8442:2015 when properly installed.
Key Features
- Manufactured from aluminium alloy or hard-wearing stainless steel
- Single-piece casting with integral shank to prevent rotation and displacement
- Aluminium option available in plain or traction-enhancing textured finishes
- Stainless steel option supplied with a smooth, heavy-duty plain surface
- Fully compliant with BS 8442:2015 for use on public highways
- Provides tactile feedback and visual clarity along crossing boundaries
Specifications
- Material: Cast aluminium alloy or stainless steel
- Top Surface Dimensions: Approximately 100mm x 100mm square
- Profile Finish: Plain (stainless steel or aluminium) or textured (aluminium only)
- Reflectivity: Non-reflective
- Standard: BS 8442:2015
- Installation Hole Required: 30mm diameter by 80mm to 85mm depth
- Adhesive Requirement: Hot melt adhesive (approx. 1kg per 5 studs)
Applications
- Delineation of Pelican, Puffin, and Toucan pedestrian crossings
- Controlled and uncontrolled pedestrian crossing boundaries
- Urban streetscapes, shared surfaces, and public highways
- Commercial access points and pedestrian route demarcations
Installation Guide
- Mark out the stud positions using temporary line paint or chalk.
- Drill a 30mm diameter hole to a depth of 80mm to 85mm at each mark to ensure the head sits flush.
- Remove all loose dust, moisture, and debris from the drilled hole.
- Pour heated hot melt adhesive into the cavity (allowing roughly 1kg per 5 studs).
- Insert the anchor shank firmly into the hole so the adhesive forms a complete seal around the base perimeter.
- Allow to cure for a few minutes; once the stud cannot be turned by hand, the surface is ready for vehicle traffic.
More road studs for the job
Shop all road studs ›
Reflective Road Stud with Metal Base - Green / Green (1-Way)
£20.11incl. VAT
Permanent Surface Mount Road Stud with Reflectors - Multiple Colours4 body colours · 8 reflector colour(s)s
From£5.38incl. VAT
Temporary Reflective Road Stud with Hot Melt Pad - Green (1-Way)2 reflective stud body types
From£1.73incl. VAT
Temporary Reflective Road Stud with Hot Melt Pad - Amber (1-Way)2 reflective stud body types
From£1.87incl. VAT
Quote for this product
This product is added to your request automatically. Add quantities and anything else you need for the same site.
Selected: Aluminium Alloy Plain Top
Aluminium Alloy Plain Top



