Photo 1 of 2Cyclists Keep Left Pathway Thermoplastic Instruction Marking 750mm
£186.19incl. VAT
Need help choosing the right product?Our UK team answers Mon–Fri 08:30–17:00
Specification for the selected option
Symbol Size: 750mm
| Certifications | |
|---|---|
| Conforms | BS EN 1871 |
| Material | |
| Type | Thermoplastic |
| Colour | Blue/White |
| Dimensions | |
| Diameter | 750mm |
| Specifications | |
| Application | If using glass bead, 250g of glass bead per square metre |
Secure checkout
Preformed thermoplastic cyclist route instruction marking directing cyclists to keep left on shared pathways.
This pre-cut thermoplastic roundel provides clear visual guidance for cyclists to stay to the left side of shared paths, reducing the risk of collisions with pedestrians. Supplied with embedded glass beads for immediate traction, it delivers a durable, skid-resistant finish when applied with a standard gas torch.
Key Features
- Complies with BS EN 1871 standards for road marking materials.
- Factory-embedded glass beads provide non-slip performance immediately after application.
- Pre-cut design delivers crisp edges and a uniform, professional finish.
- Fast installation using a gas burner with minimal required surface prep.
- Hard-wearing thermoplastic formulation suited to outdoor pedestrian and cycle pathways.
Specifications
- Material: Preformed thermoplastic
- Standard: BS EN 1871
- Marking Dimensions: 750mm x 750mm
- Symbol / Instruction: Cyclists Keep Left
- Application Surface Temperature: 5°C to 40°C
- Primer Coverage (when required): 200ml/m² to 400ml/m² depending on surface porosity
Applications
- Shared pedestrian and cycle pathways
- Urban walkways and public parks
- School, university, and hospital campus grounds
- Commercial parks and designated cycling infrastructure
Installation Guidance
- Ensure the substrate is free from loose debris, oil, grease, salt, and surface moisture.
- Concrete, block paving, and oxidised or aged asphalt require a primer coat prior to positioning.
- Place the marking in position bead-side up and heat evenly with a gas burner until completely melted and bonded to the substrate.
- Additional glass beads may be sprinkled over the molten material if extra skid resistance is required.
- Application on block paving is not recommended for heavy trafficking due to joint movement and moisture ingress causing premature cracking.
More road & floor markings for the job
Shop all road & floor markings ›
Conformable Anti-Slip Tape with Aluminium Backing - Multiple Widths and Colours3 colours · 4 widths
From£71.98incl. VAT
Pedestrians In Road Thermoplastic Road Marking Symbol - Multiple Sizes7 symbol sizes
From£278.93incl. VAT
Quote for this product
This product is added to your request automatically. Add quantities and anything else you need for the same site.
Selected: 750mm
750mm



