Photo 1 of 4Cycle Route Thermoplastic Road Marking Symbol - Multiple Sizes White
£25.56incl. VAT
Need help choosing the right product?Our UK team answers Mon–Fri 08:30–17:00
Specification for the selected option
Colour: White RAL 9003 · Symbol Size: 400x235mm
| Certifications | |
|---|---|
| Conforms | BS EN 1871 |
| Material | |
| Type | Thermoplastic |
| Colour | Signal White RAL 9003 |
| Specifications | |
| Application | If using glass bead, 250g of glass bead per square metre |
Secure checkout
Durable preformed thermoplastic cycle route marking for clear lane identification.
This Diagram 1057 cycle road marking is designed for designating dedicated cycle routes and lanes, providing high visibility for cyclists and motorists alike. Suitable for on-road and off-road highway schemes, it provides a hard-wearing, permanent marker without the need for specialist laying machinery.
Key Features
- Conforms to BS EN 1871 standard specifications
- Standard Diagram 1057 pedal cycle profile
- Pre-cut preformed thermoplastic ensures uniform, professional edges
- Monochromatic white finish for on-road cycle tracks and repeater markers
- Fast installation using a standard gas heat torch
- Accepts glass beads sprinkled over the molten material for enhanced pedestrian and vehicular slip resistance
Specifications
- Material: Preformed thermoplastic
- Colour: White
- Standard sizes: 400x235mm, 600x350mm, 800x470mm, 1000x590mm, 1215x750mm, 1780x1100mm, 2750x1700mm
- Substrate application temperature: 5°C to 40°C
- Regulatory standard: BS EN 1871
Applications
- Designating dedicated on-road cycle paths and advisory cycle lanes
- Marking advanced stop line boxes for pedal cycles at traffic signals
- Wayfinding and route confirmation along shared-use pedestrian and cycle paths
- Off-road cycleways through parks and urban infrastructure
Installation Guidelines
- Ensure the application surface is clean, dry, and cleared of all debris, oils, and loose salts
- A fast-drying primer is required on concrete, aged tarmac, or open-graded asphalt applied at 200ml/m² to 400ml/m² depending on porosity
- Lay the marking into position and heat evenly with a gas burner until melted onto the road substrate
- For increased traction, broadcast glass bead over the surface while molten and gently fuse with heat
- Not recommended for block paving due to joint movement and moisture ingress reducing product service life
More road & floor markings for the job
Shop all road & floor markings ›
Conformable Anti-Slip Tape with Aluminium Backing - Multiple Widths and Colours3 colours · 4 widths
From£71.98incl. VAT
Pedestrians In Road Thermoplastic Road Marking Symbol - Multiple Sizes7 symbol sizes
From£278.93incl. VAT
Quote for this product
This product is added to your request automatically. Add quantities and anything else you need for the same site.
Selected: White RAL 9003 / 400x235mm
White RAL 9003 / 400x235mm



