Photo 1 of 2Cycle Route Approaching Preformed Thermoplastic Warning Marking
£278.93incl. VAT
Need help choosing the right product?Our UK team answers Mon–Fri 08:30–17:00
Specification for the selected option
Symbol Size: 1200x1200mm
| Certifications | |
|---|---|
| Conforms | BS EN 1871 |
| Material | |
| Type | Thermoplastic |
| Colour | Red, white & black |
| Dimensions | |
| Width | 1200mm |
| Length | 1200mm |
| Specifications | |
| Application | If using glass bead, 250g of glass bead per square metre |
Secure checkout
Preformed thermoplastic warning marking for alerting road users to approaching cycle routes.
This pre-cut thermoplastic road marking provides a durable, high-visibility warning to drivers where cycle tracks join or cross traffic lanes, particularly where the carriageway narrows. Designed with intentional elongation so approaching drivers travelling at speed perceive the symbol in correct perspective, it delivers a sharp, clean finish on asphalt, concrete, and tarmac surfaces.
Key Features
- Simple heat application using a standard gas burner or heat torch
- Factory pre-cut design provides a uniform, professional road marking
- Embedded non-slip glass beads deliver built-in surface grip and reflectivity
- Elongated formats compensate for visual distortion at driving speeds
- Requires minimal ground preparation before heating
- Manufactured in full compliance with BSEN 1871 standards
Specifications
- Material: Heavy-duty preformed thermoplastic
- Available standard dimensions: 1200mm x 1200mm, 2500mm x 1200mm, 3030mm x 1200mm, 4040mm x 1600mm, 4300mm x 1500mm, 5050mm x 2000mm, and 7070mm x 2000mm
- Compliance: BSEN 1871
- Required road surface temperature during application: 5°C to 40°C
- Surface traction: Pre-mixed glass bead matrix; extra glass beads can be broadcast over the hot surface if added skid resistance is required
Installation & Surface Preparation
- Surfaces must be thoroughly cleaned of loose aggregate, dust, moisture, oils, and road salts prior to laying.
- For application onto concrete, worn tarmacadam, or aged asphalt, apply a suitable primer at an application rate between 200ml/m² and 400ml/m² depending on porosity.
- Lay the symbol bead-side up and heat evenly until the material melts and fuses completely to the underlying road substrate.
- Application onto block paving is not recommended due to substrate movement and joint moisture causing premature failure.
Applications
- Approaches where cycle lanes merge into vehicle carriageways
- Sections where road width narrows due to cycle track integration
- Urban, suburban, and rural public highways
- Supplementary road-level warning used alongside roadside signposts
More road & floor markings for the job
Shop all road & floor markings ›
Conformable Anti-Slip Tape with Aluminium Backing - Multiple Widths and Colours3 colours · 4 widths
From£71.98incl. VAT
Pedestrians In Road Thermoplastic Road Marking Symbol - Multiple Sizes7 symbol sizes
From£278.93incl. VAT
Quote for this product
This product is added to your request automatically. Add quantities and anything else you need for the same site.
Selected: 1200x1200mm
1200x1200mm



