Photo 1 of 2Cycle and Pedestrian Shared Path Roundel Thermoplastic Marking 750mm
£186.19incl. VAT
Need help choosing the right product?Our UK team answers Mon–Fri 08:30–17:00
Specification for the selected option
Symbol Size: 750mm
| Certifications | |
|---|---|
| Conforms | BS EN 1871 |
| Material | |
| Type | Thermoplastic |
| Colour | Blue/White |
| Dimensions | |
| Diameter | 750mm |
| Specifications | |
| Application | If using glass bead, 250g of glass bead per square metre |
Secure checkout
High-visibility shared pathway roundel marking for cyclists and pedestrians.
This preformed thermoplastic road marking roundel clearly designates shared-use routes for pedestrians and cyclists on footpaths, cycleways, and public rights of way. Supplied pre-cut for a uniform, professional finish, the material fuses directly to the underlying surface using a standard gas torch or heat gun, significantly reducing installation time and pathway closures.
Key Features
- Certified Standard: Manufactured in full compliance with BS EN 1871.
- Integrated Slip Resistance: Factory-embedded glass beads provide immediate traction without mandatory top-dusting.
- Simple Heat Application: Melts directly into prepared surfaces using a gas burner, positioning bead-side up until fully fused.
- Fast Curing: Rapid installation with minimal surface preparation, returning pathways to service quickly.
- Dual-Purpose Marking: Distinct roundel symbol clearly indicates combined route access for on-foot pedestrians and cyclists.
Specifications
- Material: Preformed thermoplastic with premixed glass beads
- Dimensions: 750mm x 750mm
- Alternative Size Options: 1200mm x 1200mm, alongside 2500mm x 1500mm and 4300mm x 1500mm elongated formats for approaching motorists
- Compliance: BS EN 1871
- Application Temperature: Substrate temperature must be between 5°C and 40°C
- Primer Coverage: 200ml/m² to 400ml/m² on concrete, aged tarmac, or worn asphalt surfaces
Installation & Substrate Notes
- Surface Preparation: Substrates must be swept dry and free of all loose stones, dust, grease, oil, and salts before layout.
- Priming: Concrete, aged tarmac, and worn asphalt require an application of fast-drying primer before placing the marking.
- Heating Method: Position the marking bead-side up and heat thoroughly with a gas burner until melted flat to the substrate. Extra glass bead may be scattered and heat-fused over the top if additional grip is needed.
- Block Paving Advisory: Application onto block paving yields a significantly shorter lifespan due to moisture ingress and individual block movement, which can lead to premature cracking.
Applications
- Shared-use cycle tracks and pedestrian footways
- Public parks, greenways, and recreational paths
- School, college, and university campuses
- Urban pedestrian schemes and public transport hubs
More road & floor markings for the job
Shop all road & floor markings ›
Conformable Anti-Slip Tape with Aluminium Backing - Multiple Widths and Colours3 colours · 4 widths
From£71.98incl. VAT
Pedestrians In Road Thermoplastic Road Marking Symbol - Multiple Sizes7 symbol sizes
From£278.93incl. VAT
Quote for this product
This product is added to your request automatically. Add quantities and anything else you need for the same site.
Selected: 750mm
750mm



