Photo 1 of 2Crossroads Warning Thermoplastic Road Marking - Multiple Sizes
£278.93incl. VAT
Need help choosing the right product?Our UK team answers Mon–Fri 08:30–17:00
Specification for the selected option
Symbol Size: 1200x1200mm
| Certifications | |
|---|---|
| Conforms | BS EN 1871 |
| Material | |
| Type | Thermoplastic |
| Colour | Red, white & black |
| Dimensions | |
| Width | 1200mm |
| Length | 1200mm |
| Specifications | |
| Application | If using glass bead, 250g of glass bead per square metre |
Secure checkout
Highly durable preformed thermoplastic crossroads ahead warning road marking.
This pre-cut road marking alerts oncoming motorists to approaching crossroads where visibility is obscured or restricted. Engineered with elongated proportions to account for perspective distortion at speed, it gives drivers clear advance notice on both A and B roads. It can be paired with roadside post-mounted warning signs and positioned near give-way markings to maximise junction safety.
Key Features
- Pre-cut thermoplastic design ensures a crisp, uniform appearance without specialist equipment
- Fully compliant with BS EN 1871 standards for road markings
- Factory-embedded glass beads provide built-in non-slip skid resistance
- Elongated graphic proportions designed for accurate interpretation by approaching traffic
- Fast torch-on application with a standard gas burner or heat torch
- Surface can be supplemented with additional glass bead during melting for extra traction
Specifications
- Material: High-grade preformed thermoplastic
- Sizes available: 1200 x 1200mm, 2500 x 1200mm, 3030 x 1200mm, 4040 x 1600mm, 4300 x 1500mm, 5050 x 2000mm, 7070 x 2000mm
- Compliance: BS EN 1871
- Application surface temperature range: 5°C to 40°C
- Primer requirement: Necessary on concrete, block paving, or aged tarmac at 200ml/m² to 400ml/m²
Applications & Installation Notes
- Ideal for concealed or blind crossroads on rural routes, highways, and A or B carriageways
- Ensure the surface is dry and thoroughly cleared of dirt, debris, oil, and road salts prior to laying
- Place marking bead-side up and heat uniformly until the material melts and fuses completely to the road
- Aged, porous asphalt and concrete require a dedicated substrate primer before positioning the marking
- Not recommended for unstable or sand-jointed block paving due to substrate movement and moisture ingress
- Can be installed directly over worn existing thermoplastic; thick or sound existing markings and resin coatings must be mechanically removed beforehand
More road & floor markings for the job
Shop all road & floor markings ›
Conformable Anti-Slip Tape with Aluminium Backing - Multiple Widths and Colours3 colours · 4 widths
From£71.98incl. VAT
Pedestrians In Road Thermoplastic Road Marking Symbol - Multiple Sizes7 symbol sizes
From£278.93incl. VAT
Quote for this product
This product is added to your request automatically. Add quantities and anything else you need for the same site.
Selected: 1200x1200mm
1200x1200mm



