Photo 1 of 2750mm No Stopping Zone Thermoplastic Road Surface Symbol
£186.19incl. VAT
Need help choosing the right product?Our UK team answers Mon–Fri 08:30–17:00
Specification for the selected option
Symbol Size: 750mm
| Certifications | |
|---|---|
| Conforms | BS EN 1871 |
| Material | |
| Type | Thermoplastic |
| Colour | Red/Blue |
| Dimensions | |
| Diameter | 750mm |
| Specifications | |
| Application | If using glass bead, 250g of glass bead per square metre |
Secure checkout
Highly visible no stopping preformed thermoplastic road marking.
Commonly known as a clearway road symbol, this pre-cut road marking designates zones where vehicle stopping is strictly prohibited. Sized at 750mm x 750mm, it is designed for clear identification on managed highways, delivery areas, and transport hubs. Larger sizes across the range feature intentionally elongated dimensions to ensure approaching drivers can read the symbol accurately at speed.
Key Features
- Simple application using a standard gas burner or heating torch
- Pre-cut format ensures uniform, sharp edges and a professional finish
- Factory-embedded glass beads deliver immediate slip resistance without manual addition
- Optional loose glass bead can be added during heating for enhanced traction
- Quick installation with minimal surface preparation required
- Complies fully with BSEN 1871
Specifications
- Material: Preformed thermoplastic
- Symbol dimensions: 750mm x 750mm (range also includes 1200mm x 1200mm, 2500mm x 1500mm, and 4300mm x 1500mm)
- Required surface temperature: 5°C to 40°C
- Primer requirement: 200ml/m² to 400ml/m² on concrete or weathered asphalt/tarmac
- Standard: BSEN 1871
Applications
- Major carriageways, clearways, and red routes
- Loading and unloading bays
- Public transport drop-off points and bus interchanges
- Facility entrances, exits, and emergency access ways
Installation & Preparation
- Surfaces must be thoroughly cleared of loose debris, dirt, oils, and road salts prior to heating.
- A fast-drying primer applied at 200ml/m² to 400ml/m² is necessary on concrete and aged, open-textured bituminous surfaces.
- Position the roundel bead-side up and heat uniformly until fully melted and fused into the road surface.
- Application onto block paving is not recommended, as joint moisture and independent block movement cause premature cracking and failure.
More road & floor markings for the job
Shop all road & floor markings ›
Conformable Anti-Slip Tape with Aluminium Backing - Multiple Widths and Colours3 colours · 4 widths
From£71.98incl. VAT
Pedestrians In Road Thermoplastic Road Marking Symbol - Multiple Sizes7 symbol sizes
From£278.93incl. VAT
Quote for this product
This product is added to your request automatically. Add quantities and anything else you need for the same site.
Selected: 750mm
750mm



