Photo 1 of 2750mm No Bus Access Thermoplastic Road Surface Symbol
£186.19incl. VAT
Need help choosing the right product?Our UK team answers Mon–Fri 08:30–17:00
Specification for the selected option
Symbol Size: 750mm
| Certifications | |
|---|---|
| Conforms | BS EN 1871 |
| Material | |
| Type | Thermoplastic |
| Colour | Red/White/Black |
| Dimensions | |
| Diameter | 750mm |
| Specifications | |
| Application | If using glass bead, 250g of glass bead per square metre |
Secure checkout
Clear bus restriction marking for controlled access roads.
This preformed thermoplastic road marking displays a clear 'Buses Prohibited' symbol, designed for quick and professional torch-applied installation. Ideal for highlighting areas where buses are restricted due to road widths, weak bridge weight limits, or heavy traffic flow, it ensures high visibility and compliance without complex groundwork.
Key Features
- Pre-cut symbol ensures consistent, accurate shaping without complex measuring
- Fast heat application using a gas burner or heat torch
- Factory-embedded glass beads provide immediate slip resistance without secondary bead spreading
- Elongated roundel design options ensure correct visual proportions when viewed at approach speeds
- Conforms to BS EN 1871 standards
- Durable thermoplastic material formulated for long service life on bituminous roads
Specifications
- Material: Preformed thermoplastic
- Symbol size: 750mm x 750mm (also available in 1200mm x 1200mm, 2500mm x 1500mm, and 4300mm x 1500mm)
- Application method: Heat-applied with gas torch
- Required surface temperature: 5°C to 40°C
- Primer requirement: 200ml/m² to 400ml/m² on concrete or aged, oxidised tarmac
- Compliance: BS EN 1871
Applications
- Roads with specific bus prohibitions
- Weak bridges and weight-restricted route approaches
- Narrow streets and high-traffic zones
- Car parks, logistics yards, and private access roads
Installation Notes
- Thoroughly clean the substrate of all loose debris, oil, grease, and road salts prior to layout.
- Apply surface primer across concrete, block paving, or worn tarmac at 200ml/m² to 400ml/m² depending on substrate porosity.
- Lay the preformed symbol bead-side up on the prepared surface and heat evenly until fully melted and bonded.
- Application onto block paving is not recommended for long-term installations due to individual block movement and sand-joint moisture.
More road & floor markings for the job
Shop all road & floor markings ›
Conformable Anti-Slip Tape with Aluminium Backing - Multiple Widths and Colours3 colours · 4 widths
From£71.98incl. VAT
Pedestrians In Road Thermoplastic Road Marking Symbol - Multiple Sizes7 symbol sizes
From£278.93incl. VAT
Quote for this product
This product is added to your request automatically. Add quantities and anything else you need for the same site.
Selected: 750mm
750mm



