Photo 1 of 2750mm Entry Restriction Road Symbol Thermoplastic Marking
£186.19incl. VAT
Need help choosing the right product?Our UK team answers Mon–Fri 08:30–17:00
Specification for the selected option
Symbol Size: 750mm
| Certifications | |
|---|---|
| Conforms | BS EN 1871 |
| Material | |
| Type | Thermoplastic |
| Colour | Red/White |
| Dimensions | |
| Diameter | 750mm |
| Specifications | |
| Application | If using glass bead, 250g of glass bead per square metre |
Secure checkout
Clear no entry road marking for effective traffic control and access restriction.
This preformed thermoplastic road marking delivers a distinct 'No Entry' symbol to prevent unauthorised vehicle access on private roads and commercial sites. Supplied pre-cut for precise uniformity, it is positioned directly onto the substrate and fused using a gas burner, creating an exceptionally durable, skid-resistant finish with minimal site downtime.
Key Features
- Simple torch-on application using a standard gas burner with no specialist moulding required
- Factory pre-cut design ensures accurate proportions and a clean, professional finish
- Pre-embedded glass beads provide immediate slip resistance upon installation
- Additional surface glass beads can be scattered and heat-fused for enhanced traction
- Quick installation process with minimal surface prep requirements
- Complies with the BS EN 1871 standard for road marking materials
Specifications
- Material: High-grade preformed thermoplastic
- Dimensions: 750mm x 750mm (additional roundel sizes include 1200mm x 1200mm, 2500mm x 1500mm, and 4300mm x 1500mm)
- Substrate application temperature: 5°C to 40°C
- Primer requirement: 200ml/m² to 400ml/m² on concrete or oxidised asphalt depending on porosity
- Standard compliance: BS EN 1871
Installation & Surface Preparation
- Surfaces must be thoroughly cleaned of loose debris, oil, grease, and moisture before laying
- Old tarmac, concrete, or block paving requires a fast-drying primer before placing the marking
- Position the marking bead-side up and heat uniformly until completely melted to the ground
- Heavily trafficked, worn thermoplastic can be overlaid directly once cleaned
- Application on block paving is not recommended due to individual block movement and joint moisture
Applications
- One-way road systems and contraflow prevention
- Car parks, commercial premises, and private access roads
- Distribution centres, logistics hubs, and industrial yards
- Restricted entry gates and access control points
More road & floor markings for the job
Shop all road & floor markings ›
Conformable Anti-Slip Tape with Aluminium Backing - Multiple Widths and Colours3 colours · 4 widths
From£71.98incl. VAT
Pedestrians In Road Thermoplastic Road Marking Symbol - Multiple Sizes7 symbol sizes
From£278.93incl. VAT
Quote for this product
This product is added to your request automatically. Add quantities and anything else you need for the same site.
Selected: 750mm
750mm



