Photo 1 of 230 Minimum Speed Limit Thermoplastic Traffic Marking - 750mm
£186.19incl. VAT
Need help choosing the right product?Our UK team answers Mon–Fri 08:30–17:00
Specification for the selected option
Symbol Size: 750mm
| Certifications | |
|---|---|
| Conforms | BS EN 1871 |
| Material | |
| Type | Thermoplastic |
| Colour | Blue/White |
| Dimensions | |
| Diameter | 750mm |
| Specifications | |
| Application | If using glass bead, 250g of glass bead per square metre |
Secure checkout
Clear ‘Minimum Speed 30’ preformed thermoplastic road marking for regulating vehicle speeds and preventing traffic congestion.
This preformed road marking designates a minimum speed limit to reduce stationary queues and keep traffic moving smoothly through high-density routes. Suitable for both public highway networks and private facilities, it delivers a durable, highly visible finish with minimal preparation.
Key Features
- Preformed roundel design ensures crisp, uniform lines without specialist tooling
- Integrated glass beads supply dependable non-slip performance and reflectivity
- Quick torch-on installation using a standard gas burner or heat gun
- Helps prevent stationary congestion in free-flowing traffic zones
- Fully compliant with BS EN 1871 standards
Specifications
- Material: High-grade preformed thermoplastic
- Design: Minimum Speed 30 roundel
- Dimensions: 750mm x 750mm (also available in 1200mm x 1200mm, 2500mm x 1500mm, and 4300mm x 1500mm elongated formats for high-speed approaches)
- Required surface temperature: 5°C to 40°C
- Regulatory compliance: BS EN 1871
Installation Notes
- Surface must be thoroughly cleared of loose dirt, debris, standing water, oils, and chemical residues before laying.
- Substrate primer is required on concrete, aged asphalt, worn tarmac, and block paving, applied at 200ml/m² to 400ml/m² depending on porosity.
- Lay the roundel with the embedded bead side facing upwards and apply heat evenly across the surface until melted and fused to the road. Additional glass beads can be broadcast onto the molten surface for increased slip resistance.
- Application onto modular block paving is not recommended for long-term use due to inter-block movement and rising joint moisture causing premature cracking.
- Heavily built-up existing thermoplastic should be removed prior to application using high-pressure water jetting, scabbling, sandblasting, or thermal lancing.
Applications
- Road tunnels and underpasses
- Airport access roads and bus/coach terminals
- Train station circulation zones and drop-offs
- Dual carriageways and busy urban corridors
- Traffic management corridors and no-waiting enforcement areas
More road & floor markings for the job
Shop all road & floor markings ›
Conformable Anti-Slip Tape with Aluminium Backing - Multiple Widths and Colours3 colours · 4 widths
From£71.98incl. VAT
Pedestrians In Road Thermoplastic Road Marking Symbol - Multiple Sizes7 symbol sizes
From£278.93incl. VAT
Quote for this product
This product is added to your request automatically. Add quantities and anything else you need for the same site.
Selected: 750mm
750mm



