Photo 1 of 410mph Thermoplastic Speed Restriction Roundel - White
Specification for the selected option
Symbol Size: 750mm
| Certifications | |
|---|---|
| Conforms | BS EN 1871 |
| Material | |
| Type | Thermoplastic |
| Dimensions | |
| Height | 750mm |
| Length | 750mm |
| Specifications | |
| Application | If using glass bead, 250g of glass bead per square metre |
Highly visible 10mph monochromatic white thermoplastic speed limit roundel for road and ground marking.
This pre-cut thermoplastic roundel provides a distinct 10mph speed limit marking, ideal for busy industrial and commercial environments. Designed without a coloured background, this plain white symbol offers a clean, uniform finish and is rapid to install using a standard gas torch, serving as a durable alternative to hand-painted graphics. Larger dimensions are elongated to compensate for perspective, ensuring the graphic appears correctly proportioned to approaching motorists.
Key Features
- Pre-cut monochromatic white format for precise edges and uniform sizing
- Elongated dimensions on larger sizes counteract perspective distortion for approaching traffic
- Quick and straightforward surface fusion using a gas heat gun
- Compatible with glass bead drop-on media for pedestrian and vehicular skid resistance
- Durable, wear-resistant construction conforming to BSEN 1871
- Requires minimal ground preparation compared to painted alternatives
Specifications
- Material: Preformed thermoplastic
- Colour: Monochromatic White
- Standard dimensions: 750 x 750mm, 1200 x 1200mm, 2500 x 1500mm, 3200 x 1500mm, 4300 x 1500mm, 4570 x 1500mm, 7600 x 1500mm
- Application surface temperature range: 5°C to 40°C
- Standard compliance: BSEN 1871
Applications
- Supermarket and retail park roadways
- Airports and cargo transit lanes
- Logistics yards, loading bays, and distribution centres
- Private access roads, residential estates, and business parks
- Industrial facilities and factory perimeters
Installation Notes
- Ensure the substrate is thoroughly dry and cleared of dirt, loose aggregates, grease, and road salt prior to layout.
- A suitable fast-drying primer must be applied when positioning onto concrete, weathered tarmac, or aged asphalt.
- Position the pre-cut sections onto the prepared ground and heat evenly until fully melted and bonded to the substrate.
- For enhanced traction, sprinkle glass beads across the molten surface and gently heat to embed them.
- Application onto block paving is not recommended, as individual block movement and joint moisture can compromise bonding and cause premature cracking.
More road & floor markings for the job
Shop all road & floor markings ›Quote for this product
This product is added to your request automatically. Add quantities and anything else you need for the same site.
Selected: 750mm


