{"title":"Road Studs","description":null,"products":[{"product_id":"white-body-road-marker-with-2-way-white-reflector-and-metal-base","title":"Reflective Road Stud with Metal Base - White \/ White (2-Way)","description":"\u003cp\u003e\u003cstrong\u003ePermanent reflective road marker featuring an inset white body housed within a heavy-duty steel base.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis inset road stud provides outstanding nocturnal visibility and resilience in demanding traffic environments. Engineered with a tough steel casing that shields the reflective component from direct wheel strikes, it offers a permanent marking solution that withstands constant vehicle passes without wearing away or scrubbing off like conventional line paint.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeavy-duty steel base protects the internal reflective marker from heavy wheel impacts\u003c\/li\u003e\n\u003cli\u003eBi-directional white reflectors provide clear delineation for traffic travelling in both directions\u003c\/li\u003e\n\u003cli\u003eSteel casing expands bonding surface area for hot melt adhesive anchoring\u003c\/li\u003e\n\u003cli\u003eResistant to tyre scrubbing from slow-turning heavy goods vehicles\u003c\/li\u003e\n\u003cli\u003eNear-indestructible design built to withstand thousands of vehicle passes\u003c\/li\u003e\n\u003cli\u003eIdeal for carriageway centre lines and private site traffic management\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBody colour: White\u003c\/li\u003e\n\u003cli\u003eReflector colour: White (2-way \/ bi-directional)\u003c\/li\u003e\n\u003cli\u003eBase material: Steel casing\u003c\/li\u003e\n\u003cli\u003eMounting type: Inset surface recess with hot melt adhesive\u003c\/li\u003e\n\u003cli\u003eAdhesive requirement: Approximately 1kg of hot melt per stud assembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRequires cutting or grinding a dedicated recess into the road surface using an SDS drill cutting bit or specialist road milling equipment\u003c\/li\u003e\n\u003cli\u003eThe prepared recess is filled with approximately 1kg of molten hot melt compound before seating the metal base and stud unit\u003c\/li\u003e\n\u003cli\u003eEnsure the surface is dry, clean, and free of loose debris before applying adhesive\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMotorway and dual-carriageway lane division and centre lines\u003c\/li\u003e\n\u003cli\u003eA-roads and primary transport routes\u003c\/li\u003e\n\u003cli\u003eLorry parking areas, distribution centres, and loading bays\u003c\/li\u003e\n\u003cli\u003ePorts, industrial estates, and commercial facilities\u003c\/li\u003e\n\u003cli\u003eUnlit private roadways and rural driveways to safeguard soft verges\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Safety Co UK","offers":[{"title":"White \/ White (2-Way)","offer_id":55523034071379,"sku":"SCU2173","price":20.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1116\/8461\/6531\/files\/fa307562099139b1ba65822616f18f1f.png?v=1792420176"},{"product_id":"white-body-road-stud-with-white-one-way-reflector-and-metal-base","title":"Reflective Road Stud with Metal Base - White \/ White (1-Way)","description":"\u003cp\u003e\u003cstrong\u003eDurable inset reflective road stud with protective steel housing for permanent lane delineation.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEngineered for permanent, heavy-duty highway and commercial installations, this inset road stud features an embedded reflective marker housed within a robust steel shoe. The metal housing shields the reflective lens against heavy vehicle impact, while providing an expanded base area for bitumen hot-melt bonding. Unlike surface road paint, this inset design will not scrub away under slow-turning heavy goods vehicles, delivering dependable delineation in all weather conditions.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeavy-duty steel shoe shields the internal reflector from impact and wear\u003c\/li\u003e\n\u003cli\u003eNear-indestructible construction built to withstand thousands of vehicle passes\u003c\/li\u003e\n\u003cli\u003eResists tyre scrubbing and abrasion caused by turning heavy goods vehicles\u003c\/li\u003e\n\u003cli\u003eExpanded shoe surface area ensures a secure, high-strength adhesive bond\u003c\/li\u003e\n\u003cli\u003eWhite body and one-way white reflector provide clear lane separation at night\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBody colour: White\u003c\/li\u003e\n\u003cli\u003eReflector colour: White (one-way)\u003c\/li\u003e\n\u003cli\u003eHousing material: Cast steel protective shoe\u003c\/li\u003e\n\u003cli\u003eInstallation type: Permanent inset (recessed)\u003c\/li\u003e\n\u003cli\u003eAdhesive requirement: Approximately 1kg of hot-melt adhesive per stud\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCut or grind a suitable recess into the road surface using an SDS drill cutting bit or dedicated road-grinding machinery\u003c\/li\u003e\n\u003cli\u003eClear the cavity of all dust, moisture, and loose debris prior to fixing\u003c\/li\u003e\n\u003cli\u003ePour approximately 1kg of molten hot-melt adhesive into the recess and bed the metal shoe assembly firmly into position\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMotorway and dual-carriageway lane delineation along centre lines\u003c\/li\u003e\n\u003cli\u003eA-road traffic lane demarcation\u003c\/li\u003e\n\u003cli\u003eLorry parking areas, freight terminals, and distribution hubs\u003c\/li\u003e\n\u003cli\u003eIndustrial loading bays and port facilities\u003c\/li\u003e\n\u003cli\u003ePrivate access roads and unlit rural driveways to safeguard grass verges\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Safety Co UK","offers":[{"title":"White \/ White (1-Way)","offer_id":55523034005843,"sku":"SCU2174","price":20.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1116\/8461\/6531\/files\/2d5cdc9bbcd7ce737674fcdf5f50504e.png?v=1792420176"},{"product_id":"amber-body-road-marker-with-amber-red-2-way-reflector-and-metal-base","title":"Reflective Road Stud with Metal Base - Amber \/ Amber\/Red (2-Way)","description":"\u003cp\u003e\u003cstrong\u003eHeavy-duty inset reflective road stud with a protective metal shoe for permanent highway and industrial delineation.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis inset road marker features an amber reflective insert housed within a robust metal shoe designed for severe-duty installations. The cast shoe shields the reflective core from tyre impact and provides an expanded surface area for adhesive bonding, ensuring the marker remains anchored even under slow-speed turning by heavy goods vehicles. Equipped with an amber body and two-way amber and red reflectors, it delivers clear boundary guidance across high-speed roads and unlit private facilities.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRecessed metal shoe protects reflective core against high-impact vehicle strikes\u003c\/li\u003e\n\u003cli\u003eResists displacement and scrubbing from heavy vehicles turning at low speeds\u003c\/li\u003e\n\u003cli\u003eEnlarged base surface ensures strong mechanical bonding with hot-melt material\u003c\/li\u003e\n\u003cli\u003eWithstands thousands of vehicle passes without premature wear or failure\u003c\/li\u003e\n\u003cli\u003eAmber and red dual reflectors highlight carriageway boundaries clearly at night\u003c\/li\u003e\n\u003cli\u003eSuitable for severe-duty public highway and private commercial applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eProtective metal base shoe\u003c\/li\u003e\n\u003cli\u003ePre-fitted amber reflective road stud with amber\/red two-way reflectors\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStud body colour: Amber\u003c\/li\u003e\n\u003cli\u003eReflector colours: Amber \/ Red (two-way)\u003c\/li\u003e\n\u003cli\u003eBase type: Recessed protective metal shoe\u003c\/li\u003e\n\u003cli\u003eInstallation method: Inset into road recess using hot-melt adhesive\u003c\/li\u003e\n\u003cli\u003eAdhesive consumption: Approximately 1 kg of hot-melt adhesive per stud\u003c\/li\u003e\n\u003cli\u003eRequired tooling: SDS drill with cutting head or specialist road-grinding machinery\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMotorway central reservations, inner slip road edges, and one-way right-hand boundaries\u003c\/li\u003e\n\u003cli\u003eA-roads and dual carriageways\u003c\/li\u003e\n\u003cli\u003eLorry parking areas, freight terminals, and logistics loading bays\u003c\/li\u003e\n\u003cli\u003ePorts, warehouses, and commercial transport yards\u003c\/li\u003e\n\u003cli\u003eUnlit private roadways and access drives to prevent vehicles overrunning soft verges\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Safety Co UK","offers":[{"title":"Amber \/ Amber\/Red (2-Way)","offer_id":55523034104147,"sku":"SCU2175","price":20.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1116\/8461\/6531\/files\/a120d9157768b3e16fb1d423ce6d1b6a.png?v=1792420176"},{"product_id":"white-body-road-stud-with-red-one-way-reflector-and-metal-base","title":"Reflective Road Stud with Metal Base - White \/ Red (1-Way)","description":"\u003cp\u003e\u003cstrong\u003eHeavy-duty inset road stud with a cast metal shoe for permanent carriageway delineation.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis permanent inset road stud combines a durable white casing with a single red reflector, pre-mounted in a robust steel shoe. Engineered to withstand high-volume, heavy vehicle traffic, the steel housing shields the reflective component from direct wheel strikes while providing an expansive surface area for hotmelt bitumen anchoring. On public highways, red reflectors indicate the left-hand boundary of the carriageway that drivers must not cross. It is also well suited to industrial sites where slow-turning HGVs regularly scuff away surface paint.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeavy-duty steel base shields the reflector from direct impact\u003c\/li\u003e\n\u003cli\u003eOne-way red reflector indicates the nearside boundary or left carriageway edge\u003c\/li\u003e\n\u003cli\u003eInset design withstands repeated crossings by heavy goods vehicles without loosening\u003c\/li\u003e\n\u003cli\u003eSuperior bonding surface area for hotmelt compound\u003c\/li\u003e\n\u003cli\u003eWill not scrub away or wear off under slow, heavy vehicle turning manoeuvres\u003c\/li\u003e\n\u003cli\u003eIdeal for poorly lit private driveways, lorry parks, and commercial yards\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBase type: Inset metal shoe\u003c\/li\u003e\n\u003cli\u003eBody colour: White\u003c\/li\u003e\n\u003cli\u003eReflector colour: Red (single-direction)\u003c\/li\u003e\n\u003cli\u003eFixing type: Recessed installation with hotmelt adhesive\u003c\/li\u003e\n\u003cli\u003eAdhesive requirement: Approximately 1kg of hotmelt compound per stud\u003c\/li\u003e\n\u003cli\u003eInstallation requirement: Surface recess cut with an SDS drill bit or specialist road milling unit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMotorways and dual carriageways (marking the left-hand edge)\u003c\/li\u003e\n\u003cli\u003eA-roads and single carriageways\u003c\/li\u003e\n\u003cli\u003eHGV distribution centres and loading bays\u003c\/li\u003e\n\u003cli\u003eDocks, ports, and industrial logistics parks\u003c\/li\u003e\n\u003cli\u003eLorry parking spaces and access lanes\u003c\/li\u003e\n\u003cli\u003eUnlit private roads and rural estate driveways to prevent vehicles running onto verges\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Safety Co UK","offers":[{"title":"White \/ Red (1-Way)","offer_id":55523034136915,"sku":"SCU2176","price":20.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1116\/8461\/6531\/files\/d2c1bdf6e8e832c3922c8a586654a704.png?v=1792420176"},{"product_id":"white-white-2-way-temporary-roadway-reflector","title":"Temporary Reflective Road Stud - White\/White (2-Way)","description":"\u003cp\u003e\u003cstrong\u003eHigh-visibility temporary reflective road stud designed for lane delineation and traffic control.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFeaturing white\/white two-way reflective lenses set within a high-visibility yellow\/green body, this temporary road stud provides dependable guidance along carriageways and private roads. Intended for installations lasting several months, it can be ordered either as a plain base or pre-fitted with a hot-melt adhesive pad to suit your preferred application method.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTwo-way white reflective faces provide clear delineation for oncoming and trailing traffic\u003c\/li\u003e\n\u003cli\u003eHigh-visibility yellow\/green body ensures conspicuous placement day and night\u003c\/li\u003e\n\u003cli\u003eEngineered for temporary traffic management schemes lasting several months\u003c\/li\u003e\n\u003cli\u003eAvailable plain or pre-fitted with an integrated hot-melt adhesive pad\u003c\/li\u003e\n\u003cli\u003eCompatible with hot-melt adhesive or cold-fix compound application methods\u003c\/li\u003e\n\u003cli\u003eStraightforward road surface preparation and fixing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReflector type: Two-way (dual-sided)\u003c\/li\u003e\n\u003cli\u003eReflective colour: White \/ White\u003c\/li\u003e\n\u003cli\u003eBody colour: High-visibility yellow\/green\u003c\/li\u003e\n\u003cli\u003eAdhesive options: Plain base (adhesive required separately) or pre-applied hot-melt pad\u003c\/li\u003e\n\u003cli\u003eAdhesive coverage (when using hot-melt): Approximately 1 kg per 8 studs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Guidance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-applied adhesive pad:\u003c\/strong\u003e Warm the tarmac or road surface using a flame gun, position the stud, and press firmly into place until bonded.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlain base:\u003c\/strong\u003e Form a small pool of heated hot-melt adhesive (allowing 1 kg per 8 studs) or appropriate cold-fix compound onto the surface, then bed the stud directly into the material.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCarriageway centre lines and lane separation during roadworks\u003c\/li\u003e\n\u003cli\u003eTraffic management schemes and contraflows\u003c\/li\u003e\n\u003cli\u003eCommercial yards, loading bays, and distribution centres\u003c\/li\u003e\n\u003cli\u003eCar parks and heavy goods vehicle bay outlines\u003c\/li\u003e\n\u003cli\u003eUnlit private drives to prevent vehicles crossing onto grass verges\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Safety Co UK","offers":[{"title":"White\/White (2-Way) \/ No Adhesive Included","offer_id":55523034169683,"sku":"SCU2177","price":2.04,"currency_code":"GBP","in_stock":true},{"title":"White\/White (2-Way) \/ HotMelt Pad Included","offer_id":55523034202451,"sku":"SCU2178","price":2.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1116\/8461\/6531\/files\/c95b37a830884f4e288f46b82304faaf.png?v=1792420178"},{"product_id":"white-1-way-temporary-roadway-reflector","title":"Temporary Reflective Road Stud with Hot Melt Pad - White (1-Way)","description":"\u003cp\u003e\u003cstrong\u003eHigh-visibility temporary reflective road stud for effective traffic guidance and lane delineation.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis temporary roadway reflector features a bright white 1-way reflective lens set into a high-visibility body, designed to mark lane divisions and centre lines. Engineered for temporary layouts lasting several months, it provides clear vehicle guidance through roadworks, traffic diversions, or private facilities. Units can be ordered either with an integrated hot-melt adhesive pad or as a plain stud for application with separate adhesives.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSingle-direction white reflective face for clear lane demarcation\u003c\/li\u003e\n\u003cli\u003eHigh-visibility yellow\/green body for heightened daytime conspicuity\u003c\/li\u003e\n\u003cli\u003eDurable build engineered for temporary deployments lasting several months\u003c\/li\u003e\n\u003cli\u003eSupplied either with a pre-applied hot-melt pad or as a plain unbacked stud\u003c\/li\u003e\n\u003cli\u003eCompatible with hot-melt bituminous adhesive or cold-applied road fixatives\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReflector colour: White (1-way)\u003c\/li\u003e\n\u003cli\u003eBody colour: High-visibility yellow\/green\u003c\/li\u003e\n\u003cli\u003eAdhesive option: Pre-applied hot-melt pad or plain underside\u003c\/li\u003e\n\u003cli\u003eMaterial coverage (plain studs): Approximately 1 kg of hot-melt adhesive per 8 studs\u003c\/li\u003e\n\u003cli\u003eMounting type: Direct surface mount\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePad-backed version:\u003c\/strong\u003e Pre-heat the clean asphalt surface using a gas burner or flame lance, then immediately press the stud firmly into place.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlain version:\u003c\/strong\u003e Melt hot adhesive in a dedicated heating vessel, dispense a small pool onto the prepared road (allowing roughly 1 kg per 8 studs), and bed the stud directly into the molten material, or install using suitable cold-pour adhesive.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePublic highway centre lines and temporary lane divisions during road maintenance\u003c\/li\u003e\n\u003cli\u003eTraffic management schemes, contraflows, and diversions\u003c\/li\u003e\n\u003cli\u003ePrivate access roads, commercial estates, and business parks\u003c\/li\u003e\n\u003cli\u003eLogistics yards, loading bays, and industrial distribution centres\u003c\/li\u003e\n\u003cli\u003eUnlit private roadways and rural drives to stop traffic straying onto soft verges\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Safety Co UK","offers":[{"title":"White (1-Way) \/ No Adhesive Included","offer_id":55523034300755,"sku":"SCU2179","price":1.87,"currency_code":"GBP","in_stock":true},{"title":"White (1-Way) \/ HotMelt Pad Included","offer_id":55523034333523,"sku":"SCU2180","price":2.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1116\/8461\/6531\/files\/dcbfb9fefd47b0321c00d152620045a7.png?v=1792420177"},{"product_id":"temporary-reflective-road-studs-with-amber-red-2-way-panels","title":"Temporary Reflective Road Stud - Amber\/Red (2-Way)","description":"\u003cp\u003e\u003cstrong\u003eHigh-visibility temporary reflective road studs for effective carriageway and lane delineation.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDesigned for temporary highway deployments lasting up to several months, these surface-mounted studs feature high-visibility yellow\/green bodies and dual-directional amber and red reflective panels. On public carriageways, red reflectors define the left-hand road edge that traffic must not cross, while amber reflectors demarcate central reservations, exit slip borders, or the right-hand boundary of one-way roads. Available plain or pre-fitted with an adhesive pad, they provide dependable night-time demarcation for roadworks and site access routes.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTwo-way amber and red reflective lenses for clear dual-directional delineation\u003c\/li\u003e\n\u003cli\u003eHigh-visibility yellow\/green body for clear daytime detection\u003c\/li\u003e\n\u003cli\u003eEngineered for temporary installations typically lasting up to several months\u003c\/li\u003e\n\u003cli\u003eAvailable plain or pre-fitted with an integral hot-melt adhesive pad\u003c\/li\u003e\n\u003cli\u003eCompatible with hot-melt compound (approximate coverage of 1 kg per 8 studs) or cold-applied compound\u003c\/li\u003e\n\u003cli\u003eSuitable for public highway roadworks, industrial facilities, and private roads\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReflector colours: Two-way Amber \/ Red\u003c\/li\u003e\n\u003cli\u003eBody colour: High-visibility yellow\/green\u003c\/li\u003e\n\u003cli\u003eMounting type: Surface mounted\u003c\/li\u003e\n\u003cli\u003eInstallation options: Pre-fitted adhesive pad or plain body\u003c\/li\u003e\n\u003cli\u003eAdhesive coverage (plain version): 1 kg per 8 studs\u003c\/li\u003e\n\u003cli\u003eLifespan profile: Temporary (up to several months)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePre-padded units require pre-heating the dry, clean road surface with a flame torch before pressing the stud firmly into position.\u003c\/li\u003e\n\u003cli\u003ePlain units are bedded directly into freshly heated adhesive (allow 1 kg per 8 studs) or installed using cold-applied fixative.\u003c\/li\u003e\n\u003cli\u003eEnsure red reflectors face oncoming vehicles along the left-hand road verge and amber reflectors face traffic along central reservations or offside lanes.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTemporary highway works, contraflows, and lane closures\u003c\/li\u003e\n\u003cli\u003eMotorway slip roads, exit ramps, and central reservations\u003c\/li\u003e\n\u003cli\u003ePorts, logistics yards, and commercial loading bays\u003c\/li\u003e\n\u003cli\u003eHGV bay marking and internal distribution lanes\u003c\/li\u003e\n\u003cli\u003eRural roads and private driveways to prevent vehicles overrunning grass verges\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Safety Co UK","offers":[{"title":"Amber\/Red (2-Way) \/ No Adhesive Included","offer_id":55523034235219,"sku":"SCU2181","price":2.04,"currency_code":"GBP","in_stock":true},{"title":"Amber\/Red (2-Way) \/ HotMelt Pad Included","offer_id":55523034267987,"sku":"SCU2182","price":2.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1116\/8461\/6531\/files\/60e833fd691fe70514185ae032722ee4.png?v=1792420177"},{"product_id":"red-single-direction-temporary-reflective-road-marker","title":"Temporary Reflective Road Stud with Hot Melt Pad - Red (1-Way)","description":"\u003cp\u003e\u003cstrong\u003eHigh-visibility temporary reflective road stud for effective traffic guidance.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis road marker is engineered for short-term traffic management schemes and temporary highway layouts lasting several months, providing a clear red unidirectional retroreflective marker to demarcate boundaries safely. On public highways, red reflectors delineate the left-hand verge or carriageway boundary to signify a line that must not be crossed. Choose between a version with an integral hot-melt adhesive pad or a plain stud for use with independent adhesive compounds.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUnidirectional red reflector clearly delineates carriageway boundaries and verge lines\u003c\/li\u003e\n\u003cli\u003eHigh-visibility bright yellow\/green body provides daytime conspicuousness\u003c\/li\u003e\n\u003cli\u003eEngineered for temporary road layouts lasting from short phases up to several months\u003c\/li\u003e\n\u003cli\u003eAvailable with an integral hot-melt adhesive base or as an unbacked plain marker\u003c\/li\u003e\n\u003cli\u003eSurface-mounted installation without drilling or excavating carriageway surfaces\u003c\/li\u003e\n\u003cli\u003eRobust construction designed to withstand regular traffic contact\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReflector colour: Red (single direction \/ one-way)\u003c\/li\u003e\n\u003cli\u003eBody colour: Fluorescent yellow\/green\u003c\/li\u003e\n\u003cli\u003eFixing options: Pre-applied hot-melt pad or plain base (requires separate adhesive)\u003c\/li\u003e\n\u003cli\u003eAdhesive consumption (plain stud with hot-melt): Approximately 1 kg per 8 studs\u003c\/li\u003e\n\u003cli\u003eInstallation requirements (pad version): Gas flame torch to pre-heat road surface\u003c\/li\u003e\n\u003cli\u003eInstallation requirements (plain version): Hot-melt adhesive compound or cold-applied resin\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLeft-hand edge line delineation during highway maintenance and contraflows\u003c\/li\u003e\n\u003cli\u003eTemporary roadworks, lane diversions, and contraflow demarcation\u003c\/li\u003e\n\u003cli\u003eDemarcating unlit rural driveways to keep vehicles from running onto soft verges\u003c\/li\u003e\n\u003cli\u003eHGV lane guidance, warehouse loading bays, docks, and distribution centres\u003c\/li\u003e\n\u003cli\u003eEvent traffic management, directional control, and temporary parking layouts\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Safety Co UK","offers":[{"title":"Red (1-Way) \/ No Adhesive Included","offer_id":55523034366291,"sku":"SCU2183","price":1.87,"currency_code":"GBP","in_stock":true},{"title":"Red (1-Way) \/ HotMelt Pad Included","offer_id":55523034399059,"sku":"SCU2184","price":2.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1116\/8461\/6531\/files\/5723e276b2795f9477ad2b236f30d0c8.png?v=1792420177"},{"product_id":"metallic-pedestrian-crossing-road-studs-aluminium-or-stainless-steel","title":"Metallic Pedestrian Crossing Road Studs - Aluminium or Stainless Steel","description":"\u003cp\u003e\u003cstrong\u003eDurable metallic pedestrian crossing road studs for enhanced visibility and tactile demarcation.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThese non-reflective metallic road studs are designed to delineate pedestrian crossing points on public carriageways, providing clear visual marking and physical tactile feedback. Formed from a single solid piece with an integrated anchor shank to prevent twisting or loosening, they fully comply with BS 8442:2015 when properly installed.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eManufactured from aluminium alloy or hard-wearing stainless steel\u003c\/li\u003e\n\u003cli\u003eSingle-piece casting with integral shank to prevent rotation and displacement\u003c\/li\u003e\n\u003cli\u003eAluminium option available in plain or traction-enhancing textured finishes\u003c\/li\u003e\n\u003cli\u003eStainless steel option supplied with a smooth, heavy-duty plain surface\u003c\/li\u003e\n\u003cli\u003eFully compliant with BS 8442:2015 for use on public highways\u003c\/li\u003e\n\u003cli\u003eProvides tactile feedback and visual clarity along crossing boundaries\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaterial: Cast aluminium alloy or stainless steel\u003c\/li\u003e\n\u003cli\u003eTop Surface Dimensions: Approximately 100mm x 100mm square\u003c\/li\u003e\n\u003cli\u003eProfile Finish: Plain (stainless steel or aluminium) or textured (aluminium only)\u003c\/li\u003e\n\u003cli\u003eReflectivity: Non-reflective\u003c\/li\u003e\n\u003cli\u003eStandard: BS 8442:2015\u003c\/li\u003e\n\u003cli\u003eInstallation Hole Required: 30mm diameter by 80mm to 85mm depth\u003c\/li\u003e\n\u003cli\u003eAdhesive Requirement: Hot melt adhesive (approx. 1kg per 5 studs)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDelineation of Pelican, Puffin, and Toucan pedestrian crossings\u003c\/li\u003e\n\u003cli\u003eControlled and uncontrolled pedestrian crossing boundaries\u003c\/li\u003e\n\u003cli\u003eUrban streetscapes, shared surfaces, and public highways\u003c\/li\u003e\n\u003cli\u003eCommercial access points and pedestrian route demarcations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMark out the stud positions using temporary line paint or chalk.\u003c\/li\u003e\n\u003cli\u003eDrill a 30mm diameter hole to a depth of 80mm to 85mm at each mark to ensure the head sits flush.\u003c\/li\u003e\n\u003cli\u003eRemove all loose dust, moisture, and debris from the drilled hole.\u003c\/li\u003e\n\u003cli\u003ePour heated hot melt adhesive into the cavity (allowing roughly 1kg per 5 studs).\u003c\/li\u003e\n\u003cli\u003eInsert the anchor shank firmly into the hole so the adhesive forms a complete seal around the base perimeter.\u003c\/li\u003e\n\u003cli\u003eAllow to cure for a few minutes; once the stud cannot be turned by hand, the surface is ready for vehicle traffic.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Safety Co UK","offers":[{"title":"Aluminium Alloy Plain Top","offer_id":55523908190547,"sku":"SCU13796","price":11.98,"currency_code":"GBP","in_stock":true},{"title":"Aluminium Alloy Texture Top","offer_id":55523908223315,"sku":"SCU13797","price":11.98,"currency_code":"GBP","in_stock":true},{"title":"Stainless Plain Top","offer_id":55523908256083,"sku":"SCU13798","price":23.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1116\/8461\/6531\/files\/89a8c52f4786601a1d2b81ba56066f64.png?v=1792420966"},{"product_id":"amber-reflective-road-marker-with-metal-base-1-way","title":"Reflective Road Stud with Metal Base - Amber \/ Amber (1-Way)","description":"\u003cp\u003e\u003cstrong\u003eDurable reflective road stud with protective steel housing for permanent traffic demarcation.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis permanent inset road marker features an amber one-way reflector mounted directly inside a cast steel shoe. Designed to withstand relentless traffic pounding, the protective metal housing shields the reflective element from direct vehicle impacts and tyre wear. It is engineered specifically for demanding environments such as motorways, dual carriageways, logistics hubs, and industrial yards where regular painted lines scrub away under heavy turning wheels.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne-way amber reflector providing bright directional visibility at night and in poor weather\u003c\/li\u003e\n\u003cli\u003eHeavy-duty steel shoe shields the internal reflector from crushing vehicle loads\u003c\/li\u003e\n\u003cli\u003eBroad base profile offers a larger surface bonding area for high-strength adhesion\u003c\/li\u003e\n\u003cli\u003eResists tyre scrubbing from heavy goods vehicles turning at low speeds\u003c\/li\u003e\n\u003cli\u003eExceptional lifespan designed to endure thousands of direct wheel passes without failing\u003c\/li\u003e\n\u003cli\u003eInset mounting sits flush with the road to prevent dislodgement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMarker Type: Permanent inset road stud\u003c\/li\u003e\n\u003cli\u003eReflector: Amber, 1-way reflective lens\u003c\/li\u003e\n\u003cli\u003eHousing Material: Protective cast steel shoe\u003c\/li\u003e\n\u003cli\u003eAdhesive Requirement: Approximately 1kg of hotmelt adhesive per stud\u003c\/li\u003e\n\u003cli\u003eInstallation Method: Recessed inset using hotmelt compound\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRequires cutting or grinding a dedicated recess into the asphalt or concrete surface using an SDS drill cutting head or a specialist road-milling machine.\u003c\/li\u003e\n\u003cli\u003eThe milled pocket is filled with approximately 1kg of molten hotmelt before bedding the metal shoe assembly securely in place.\u003c\/li\u003e\n\u003cli\u003eEnsure the cavity is dry, clean, and free of loose debris before pouring the adhesive.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMotorway and dual carriageway central reservation demarcation\u003c\/li\u003e\n\u003cli\u003eMarking the inner boundary edge of motorway exit slip roads\u003c\/li\u003e\n\u003cli\u003eRight-hand carriageway edge delineation on one-way roads\u003c\/li\u003e\n\u003cli\u003eHeavy goods vehicle parking bays, distribution depots, and loading docks\u003c\/li\u003e\n\u003cli\u003eCommercial vehicle lanes in ports, freight yards, and industrial estates\u003c\/li\u003e\n\u003cli\u003eUnlit private access roads and rural estates to keep vehicles clear of soft grass verges\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Safety Co UK","offers":[{"title":"Amber \/ Amber (1-Way)","offer_id":55524018651475,"sku":"SCU15419","price":20.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1116\/8461\/6531\/files\/59085de400798607708c073879962993.png?v=1792421125"},{"product_id":"temporary-reflective-road-stud-with-amber-1-way-reflector","title":"Temporary Reflective Road Stud with Hot Melt Pad - Amber (1-Way)","description":"\u003cp\u003e\u003cstrong\u003eHigh-visibility temporary road stud with an amber one-way reflector for traffic delineation and lane marking.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis temporary surface-mounted road stud is designed to guide traffic through contraflows, roadworks, and revised road layouts for several months. Manufactured with a high-visibility yellow-green casing and a directional amber reflector, it provides clear boundary delineation for drivers during night-time travel and adverse weather.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDirectional amber reflector to highlight boundaries that traffic must not cross\u003c\/li\u003e\n\u003cli\u003eBright yellow-green body for maximum daytime contrast and visibility\u003c\/li\u003e\n\u003cli\u003eDesigned for temporary installations lasting up to several months\u003c\/li\u003e\n\u003cli\u003eAvailable with an integrated hot-melt adhesive pad or as a plain-backed unit\u003c\/li\u003e\n\u003cli\u003eQuick surface-mounted fitting that requires no road core cutting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Guidance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePad-backed option:\u003c\/strong\u003e Road surface must be pre-heated with a flame gun prior to pressing the stud into position.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlain option:\u003c\/strong\u003e Fitted using separate hot-melt adhesive (allow approximately 1 kg per 8 studs) or suitable cold-applied road adhesive.\u003c\/li\u003e\n\u003cli\u003eSurfaces should be swept clean, dry, and free of loose material before application.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflector Colour:\u003c\/strong\u003e Amber (1-way)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Colour:\u003c\/strong\u003e High-visibility yellow\/green\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Style:\u003c\/strong\u003e Surface mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Options:\u003c\/strong\u003e Plain base or pre-fitted hot-melt pad\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesive Requirement:\u003c\/strong\u003e Approximately 1 kg hot-melt adhesive per 8 plain studs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurability:\u003c\/strong\u003e Temporary use (several months)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMotorway central reservations and inner margins of exit slip roads\u003c\/li\u003e\n\u003cli\u003eRight-hand carriageway marking on one-way streets and dual carriageways\u003c\/li\u003e\n\u003cli\u003eTemporary traffic diversions, lane narrowing, and contraflow schemes\u003c\/li\u003e\n\u003cli\u003ePrivate commercial roads, distribution centres, and loading bays\u003c\/li\u003e\n\u003cli\u003eUnlit rural driveways and private access tracks to prevent vehicles straying onto grass verges\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Safety Co UK","offers":[{"title":"Amber (1-Way) \/ No Adhesive Included","offer_id":55524018717011,"sku":"SCU15420","price":1.87,"currency_code":"GBP","in_stock":true},{"title":"Amber (1-Way) \/ HotMelt Pad Included","offer_id":55524018749779,"sku":"SCU15421","price":2.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1116\/8461\/6531\/files\/b8a325711834bb0dc3763e565ebe1986.png?v=1792421125"},{"product_id":"green-one-way-temporary-reflective-road-marker","title":"Temporary Reflective Road Stud with Hot Melt Pad - Green (1-Way)","description":"\u003cp\u003e\u003cstrong\u003eHigh-visibility temporary reflective road stud for reliable traffic delineation and guidance.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFeaturing a green one-way reflective lens set into a high-visibility yellow-green casing, this surface-mounted marker is designed for short- to medium-term traffic management lasting several months. Under UK road guidance, green reflectors denote laybys and slip road entrances on dual carriageways and motorways. Available with either a plain base or a pre-applied hot melt pad, it allows swift installation across highway schemes, logistics yards, and commercial premises.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDirectional green one-way reflective element for sharp nocturnal visibility\u003c\/li\u003e\n\u003cli\u003eConspicuous bright yellow-green body for clear daytime recognition\u003c\/li\u003e\n\u003cli\u003eEngineered for temporary installations lasting up to several months\u003c\/li\u003e\n\u003cli\u003eChoice of a plain base or a pre-fitted hot melt bonding pad\u003c\/li\u003e\n\u003cli\u003eFast surface-mount fixing without deep carriageway excavation\u003c\/li\u003e\n\u003cli\u003eSuitable for asphalt, macadam, and concrete roadways\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation \u0026amp; Fixing\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePad-backed version: heat the road surface with a gas torch or burner before pressing the stud firmly into position\u003c\/li\u003e\n\u003cli\u003ePlain version: bed into pooled hot melt adhesive or suitable cold-pour fixing compounds\u003c\/li\u003e\n\u003cli\u003eAdhesive consumption: allow approximately 1 kg of separate hot melt adhesive per 8 studs\u003c\/li\u003e\n\u003cli\u003eEnsure the installation surface is dry, clean, and free of loose debris or oil\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMarker type: Temporary surface-mount reflective road marker\u003c\/li\u003e\n\u003cli\u003eReflector colour: Green (one-way)\u003c\/li\u003e\n\u003cli\u003eReflector purpose: Slip road entrances, access points, and laybys\u003c\/li\u003e\n\u003cli\u003eBody colour: High-visibility yellow-green\u003c\/li\u003e\n\u003cli\u003eBase options: Plain base or pre-attached hot melt pad\u003c\/li\u003e\n\u003cli\u003eHot melt consumption (plain version): 1 kg per 8 studs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDemarcating slip road entry and exit points on highway schemes\u003c\/li\u003e\n\u003cli\u003eIdentifying laybys and emergency pull-ins during contraflows and resurfacing\u003c\/li\u003e\n\u003cli\u003eTemporary lane management and junction realignments\u003c\/li\u003e\n\u003cli\u003eCommercial estates, distribution centres, loading bays, and private roads\u003c\/li\u003e\n\u003cli\u003eEvent traffic routing and short-term parking management\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Safety Co UK","offers":[{"title":"Green (1-Way) \/ No Adhesive Included","offer_id":55524217651539,"sku":"SCU18009","price":1.87,"currency_code":"GBP","in_stock":true},{"title":"Green (1-Way) \/ HotMelt Pad Included","offer_id":55524217684307,"sku":"SCU18010","price":1.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1116\/8461\/6531\/files\/cd9471afea52e59aa09a31e1a4661547.png?v=1792421284"},{"product_id":"permanent-surface-mount-road-stud-with-reflectors-multiple-colours","title":"Permanent Surface Mount Road Stud with Reflectors - Multiple Colours","description":"\u003cp\u003e\u003cstrong\u003eDurable permanent surface-mount road stud engineered for clear lane demarcation and night-time guidance.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDesigned for long-term temporary and permanent installations across public road networks and commercial sites, this surface-mount road stud delivers outstanding retro-reflective visibility. It fixes directly onto the road surface using hot melt adhesive, or can be seated within a protective metal shoe for high-volume carriageways.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHigh-performance reflective elements providing clear guidance in darkness and adverse weather\u003c\/li\u003e\n\u003cli\u003eRobust surface-mount construction suitable for heavy everyday traffic\u003c\/li\u003e\n\u003cli\u003eAdhesive mounting requires approximately 1 kg of hot melt per 8 studs\u003c\/li\u003e\n\u003cli\u003eCan be paired with a metal shoe for severe-duty and high-wear environments\u003c\/li\u003e\n\u003cli\u003eManufactured to meet highway standards for colour-coded lane delineation\u003c\/li\u003e\n\u003cli\u003eResistant to dislodgement and surface abrasion from slow-turning vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBody colour options: White, Yellow\u003c\/li\u003e\n\u003cli\u003eReflector colour combinations: White (1-way\/2-way), Red (1-way), Amber (1-way\/2-way), Amber\/Red (2-way), Green (1-way), Blue (2-way)\u003c\/li\u003e\n\u003cli\u003eFixing method: Hot melt adhesive (approx. 1 kg per 8 units) or protective metal casing\u003c\/li\u003e\n\u003cli\u003eInstallation type: Surface mount\u003c\/li\u003e\n\u003cli\u003eSuitability: Long-term temporary and permanent road layouts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCarriageway Colour Regulations\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhite:\u003c\/strong\u003e Marks lane divisions and the centre line of a carriageway\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed:\u003c\/strong\u003e Delineates the left-hand edge of the running lane\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmber:\u003c\/strong\u003e Indicates the central reservation or the right-hand boundary of a one-way road\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGreen:\u003c\/strong\u003e Identifies motorway and dual carriageway slip road junctions and laybys\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePublic highways, dual carriageways, and motorway networks\u003c\/li\u003e\n\u003cli\u003eSlip road exits, access points, and layby identification\u003c\/li\u003e\n\u003cli\u003eDistribution centres, ports, loading bays, and HGV parking bays\u003c\/li\u003e\n\u003cli\u003ePrivate access roads, unlit rural lanes, and long estate driveways\u003c\/li\u003e\n\u003cli\u003eCar park bay guidance and one-way traffic routing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Safety Co UK","offers":[{"title":"Blue \/ Blue (2-Way)","offer_id":55524288790867,"sku":"SCU18112","price":9.12,"currency_code":"GBP","in_stock":true},{"title":"Amber \/ Amber (1-Way)","offer_id":55524288823635,"sku":"SCU18113","price":5.38,"currency_code":"GBP","in_stock":true},{"title":"Amber \/ Amber (2-Way)","offer_id":55524288856403,"sku":"SCU18114","price":5.54,"currency_code":"GBP","in_stock":true},{"title":"Amber \/ Amber\/Red (2-Way)","offer_id":55524288889171,"sku":"SCU18115","price":5.54,"currency_code":"GBP","in_stock":true},{"title":"Green \/ Green (1-Way)","offer_id":55524288921939,"sku":"SCU18116","price":5.38,"currency_code":"GBP","in_stock":true},{"title":"White \/ Red (1-Way)","offer_id":55524288954707,"sku":"SCU18117","price":5.38,"currency_code":"GBP","in_stock":true},{"title":"White \/ White (1-Way)","offer_id":55524288987475,"sku":"SCU18118","price":5.38,"currency_code":"GBP","in_stock":true},{"title":"White \/ White (2-Way)","offer_id":55524289020243,"sku":"SCU18119","price":5.54,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1116\/8461\/6531\/files\/d944de23498191e496ba747ba3de402d.png?v=1792421307"},{"product_id":"permanent-reflective-road-stud-with-metal-shoe-green-1-way-reflector","title":"Reflective Road Stud with Metal Base - Green \/ Green (1-Way)","description":"\u003cp\u003e\u003cstrong\u003eDurable reflective road stud for long-lasting lane marking.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis permanent inset road stud features a resilient central reflective insert encased within a heavy-duty protective steel shoe. Engineered to withstand thousands of direct vehicle passes without deteriorating, the metal housing shields the optic from heavy tyre impacts and prevents slow-speed tyre scrubbing that normally wears away traditional road markings. Designed for permanent, heavy-duty highway and commercial schemes, the shoe also provides an expanded contact area for molten adhesive bonding.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeavy-duty protective steel shoe shields the internal reflector from high-impact traffic\u003c\/li\u003e\n\u003cli\u003eNear-indestructible inset design engineered for permanent, high-volume traffic applications\u003c\/li\u003e\n\u003cli\u003eGreen one-way reflector indicates slip road entrances and laybys on dual carriageways and motorways\u003c\/li\u003e\n\u003cli\u003eExpanded underside profile offers an increased surface area for maximum adhesive bond strength\u003c\/li\u003e\n\u003cli\u003eResists wear and scrubbing from turning heavy goods vehicles far better than painted lines\u003c\/li\u003e\n\u003cli\u003eFitted securely flush into a prepared roadway recess using hot-melt compound\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStud type: Permanent inset with protective shoe\u003c\/li\u003e\n\u003cli\u003eShoe material: Steel \/ cast metal\u003c\/li\u003e\n\u003cli\u003eReflector configuration: 1-way green\u003c\/li\u003e\n\u003cli\u003eAdhesive requirement: Approximately 1 kg of hot melt per inset stud\u003c\/li\u003e\n\u003cli\u003eInstallation method: Inset ground recess via SDS cutting bit or road milling machine\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDual carriageway and motorway slip road entry delineation\u003c\/li\u003e\n\u003cli\u003eMotorway layby markings and exit approaches\u003c\/li\u003e\n\u003cli\u003eLorry parks, distribution centres, and heavy-goods loading bays\u003c\/li\u003e\n\u003cli\u003ePort facilities, industrial estates, and warehouse transport yards\u003c\/li\u003e\n\u003cli\u003eUnlit private roadways and rural estates to keep vehicles clear of soft verges\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Safety Co UK","offers":[{"title":"Green \/ Green (1-Way)","offer_id":55524905910611,"sku":"SCU18756","price":20.11,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1116\/8461\/6531\/files\/20d038b34f6879fa88f1caca091ac3e7.png?v=1792421578"}],"url":"https:\/\/safety-co.co.uk\/collections\/road-studs.oembed","provider":"Safety Co UK","version":"1.0","type":"link"}